

A 17300 rpm rating sets BFN0724SS-01 apart within the supplied blower list. This 24VDC centrifugal blower is intended for electronic equipment and ducted local cooling, using a 70 x 70 x 25 mm body.
| Rated Voltage(V) | 24 |
|---|---|
| Size(mm) | 70x70x25 |
| Max.Air Flow(m³/h) | 30.4 |
| Max.Pressure(Pa) | 4897.1 |
| Input Power(W) | 36 |
| Speed(rpm) | 17300 |
| Noise(db) | 38 |
In printing equipment, Delta BFN0724SS-01 supplies the forced-air element of the cooling system. As a brushless DC centrifugal fan, it is intended for integration into a defined mechanical and electrical assembly.
The 24 V DC supply requirement gives electrical designers a clear basis for matching the fan to the equipment power architecture. Ball-bearing motor support provides a durable rotating assembly for repeated operating duty. Good inlet spacing helps reduce turbulence, which matters when balancing usable cooling capacity against installed sound levels.
For procurement, retain the complete model code and check the interface against the drawing; this supports repeatable assembly and accurate replacement ordering.
For printing equipment, Delta BFN0724SS-01 provides equipment cooling around internal electronic assemblies. Managing heat generated during repeated operating cycles helps maintain consistent equipment operation.
In projection equipment, air movement helps handle concentrated heat inside the enclosure. Delta BFN0724SS-01 supports cooling around thermally loaded internal components, contributing to steady temperature management.
Delta BFN0724SS-01 supports cooling in electronic equipment. Air circulation around heat-generating circuit assemblies helps manage localized heat buildup, supporting thermal stability.
RoHS Compliant is listed in the workbook. Obtain the current exact-model declaration and datasheet before claiming safety approvals, ingress protection or international compliance.
The workbook lists 70x70x25 mm. Confirm overall depth, hole pattern, connector clearance and guard or inlet-ring dimensions in the exact mechanical drawing.
The workbook lists 4897.1 Pa maximum pressure. Maximum pressure and maximum airflow occur at different points, so select BFN0724SS-01 from its curve at the required system resistance.
17300 rpm is listed in the workbook. This value alone does not establish adjustable-speed capability; confirm the control input and permitted operating range in the exact datasheet.
36 W is shown in the filter data. Check whether the corresponding datasheet defines it as rated, free-air or maximum-load input before sizing the power source.
BFN0724SS-01 is listed for Electronic Equipment cooling. Confirm the installed airflow demand, pressure loss and ambient conditions before approval.