



EFB0924HHE provides a 24VDC axial fan format for industrial equipment and power-supply ventilation. The supplied 92 x 92 x 38 mm dimensions distinguish its deeper frame from 25 mm versions of this size.
| Rated Voltage(V) | 24 |
|---|---|
| Size(mm) | 92*92*38 |
| Input Power(W) | 46 |
EFB0924HHE is a Delta cooling solution for power-supply equipment. This brushless DC axial fan gives designers a practical means of circulating air through a thermally loaded equipment section.
The 24 V DC supply requirement gives electrical designers a clear basis for matching the fan to the equipment power architecture. The axial layout moves air along the fan axis, supporting a direct ventilation route through the equipment opening. Keeping inlet obstructions clear helps preserve useful airflow without spending extra power on avoidable system losses.
Equipment manufacturers and maintenance teams should match the complete part number and installation limits for reliable operation across the service cycle.
For power-supply equipment, Delta EFB0924HHE provides equipment cooling around power-conversion components. Managing electrical conversion losses helps maintain dependable power delivery.
In industrial control equipment, air movement helps handle heat accumulated within enclosures. Delta EFB0924HHE supports cooling around controllers and electronic modules, contributing to stable automation operation.
Delta EFB0924HHE supports cooling in energy equipment. Air circulation around electrical conversion assemblies helps manage recurring thermal loads, supporting reliable equipment operation.
In electronic equipment, Delta EFB0924HHE helps remove heat from heat-generating circuit assemblies. The cooling solution addresses localized heat buildup to support thermal stability.
EFB0924HHE is listed for Industrial Equipment cooling. Confirm the installed airflow demand, pressure loss and ambient conditions before approval.
The provided parameters do not prove a cost saving. Compare purchase price, power at the real operating point, service access, expected life and downtime risk for the complete cooling system.
No maximum-pressure value is present in the filter row. Match the exact-model curve to the system resistance before using the fan in a restricted airflow path.
46 W is shown in the filter data. Check whether the corresponding datasheet defines it as rated, free-air or maximum-load input before sizing the power source.
No speed value is present in the filter row. Confirm rated speed and any control range from the exact-model specification before selection.
The listed input-power figure is 46 W, but efficiency must be evaluated at the required airflow and pressure. Check the applicable fan curve and test conditions before comparison.

For industrial equipment ventilation, EFB0812HHB pairs a 3800 rpm axial fan rotor with a 12VDC supply. A 15 mm-deep, 80 mm frame and 3.96 W listed input define its fit, with 82.92 m3/h maximum airflow specified.
Read More
A listed 0.35 W input is the standout selection point of EFB0405LA-F00 for industrial electronics. This 5VDC axial fan uses a 40 x 40 x 10 mm frame and a 4000 rpm rotor for its compact cooling format.
Read More
EFB0812HHB-F00 combines a 15 mm-deep, 80 mm square axial fan frame with 12VDC operation. Intended for industrial equipment cooling, it lists 82.2 m3/h maximum airflow and 3800 rpm speed, with 3.96 W input.
Read More
EFB0512HA is a 12VDC axial fan with a 50 x 50 x 10 mm body for industrial electronics cooling. A listed 1.2 W input and 5500 rpm speed distinguish this shallow format, with 19.38 m3/h maximum airflow.
Read More
EFB0824EHF brings a 32 mm-deep axial format to industrial electronics cooling. This 24VDC fan measures 80 mm square and lists 5200 rpm operation, with 122.4 Pa maximum static pressure and 5.52 W input.
Read More
EFB0812EHF is a 12VDC axial fan for industrial electronics, using a 32 mm-deep, 80 mm square body. Its listed 4100 rpm speed and 105.3 m3/h maximum airflow distinguish it from the 25 mm EFB frame options.
Read More