



TFB0412EHN is a 12VDC brushless fan for electronic equipment cooling, specified at 15000 rpm. A 40 x 40 x 28 mm envelope houses the assembly, with 44.251 m3/h listed maximum airflow and 8.64 W input.
| Rated Voltage(V) | 12 |
|---|---|
| Size(mm) | 40*40*28 |
| Max.Air Flow(m³/h) | 44.251 |
| Input Power(W) | 8.64 |
| Speed(rpm) | 15000 |
| Noise(db) | 58 |
The TFB0412EHN addresses ventilation needs in custom thermal-management equipment. Delta's brushless DC axial fan format allows cooling airflow to be integrated alongside the equipment's heat-producing assemblies.
The listed 8.64 W input is relevant to supply sizing and the system energy budget; actual consumption depends on the operating duty. The axial layout moves air along the fan axis, supporting a direct ventilation route through the equipment opening. A controlled exhaust route limits recirculation, allowing the delivered air to carry heat away rather than return to the inlet.
For system integrators, a confirmed operating point and exact interface match provide the basis for stable cooling and dependable replacement planning.
Delta TFB0412EHN supports cooling in electronic equipment. Air circulation around heat-generating circuit assemblies helps manage localized heat buildup, supporting thermal stability.
In custom thermal-management equipment, Delta TFB0412EHN helps remove heat from enclosed components. The cooling solution addresses restricted airflow paths to support repeatable equipment cooling.
TFB0412EHN is listed for Electronic Equipment cooling. Confirm the installed airflow demand, pressure loss and ambient conditions before approval.
15000 rpm is listed in the workbook. This value alone does not establish adjustable-speed capability; confirm the control input and permitted operating range in the exact datasheet.
In Stock is shown in the workbook, but this is not a delivery guarantee. Confirm the complete part number, quantity, current inventory and committed lead time when ordering.
12VDC is listed for TFB0412EHN. Verify the allowable input range, phase, frequency where applicable, polarity and wiring diagram in the exact specification.
The workbook lists 40 x 40 x 28 mm. Confirm overall depth, hole pattern, connector clearance and guard or inlet-ring dimensions in the exact mechanical drawing.