

Built for telecom cabinets and network equipment, SUNON MF35100V1-10000-A99 uses a 35 × 35 × 10 mm DC axial fan arrangement at 5 VDC. 10000 rpm is the model's most distinctive operating parameter. Review its suffix definition during compatibility checking. Reconcile the model code with the required electrical interface.
| Rated Voltage(V) | 5 |
|---|---|
| Size(mm) | 35x35x10mm |
| Max.Air Flow(m³/h) | 12.2 |
| Max.Pressure(Pa) | 54.8 |
| Input Power(W) | 0.68 |
| Speed(rpm) | 10000 |
| Noise(db) | 28 |
SUNON MF35100V1-10000-A99 is a DC brushless axial fan for telecommunications equipment. It establishes forced airflow where passive cooling cannot adequately protect heat-producing assemblies.
The SUNON product series carries RoHS compliance and recognized safety approvals; buyers should confirm the approval marks for this exact suffix and target market. Separating cool intake air from warm exhaust limits recirculation and improves heat-transfer effectiveness inside the equipment.
The final MF35100V1-10000-A99 selection should consider connector reach as part of the installation layout. Finishing replacement-fit checks within OEM validation helps reduce integration uncertainty and supports reliable equipment cooling. Confirm that the mating lead reaches without tension or sharp bending.
SUNON MF35100V1-10000-A99 serves security-camera equipment. Airflow around image sensors, processors and power circuits helps address heat inside compact camera housings. The fan gives OEM equipment a defined air route and supports stable video operation.
SUNON MF35100V1-10000-A99 serves video-recording equipment. Airflow around storage, processing and power assemblies helps address continuous recording workloads. The fan gives OEM equipment a defined air route and supports reliable monitoring service.
SUNON MF35100V1-10000-A99 serves security monitoring systems. Airflow around network and control electronics helps address round-the-clock equipment heat. The fan gives OEM equipment a defined air route and supports system availability. It supports reliable equipment cooling.
Use the listed voltage, size, 12.2 m³/h airflow, 10000 rpm, and 0.68 W input for preliminary comparison.
It is listed for telecom cabinets and network equipment. Check dimensions, airflow, pressure, and the installation environment against the actual equipment.
The exact IP or protection option is not stated in the supplied row. Confirm the full suffix in the applicable SUNON datasheet.
Match voltage, dimensions, mounting, airflow direction, airflow, pressure, connector, control signal, and protection before substitution.
Compare its listed 0.68 W input with the required airflow and run time. Total savings depend on the complete system duty point.

SUNON configures MF30060V1-10000-A99 as a 30 × 30 × 6 mm DC axial fan for telecom cabinets and network equipment, operating at 5 VDC. Its 8.3 m³/h airflow rating suits the stated equipment-cooling role. Review its pressure capability during compatibility checking. Reconcile the model code with the required electrical interface.
Read More
Within telecom cabinets and network equipment, SUNON MF25150V1-10000-A99 serves as a 25 × 25 × 15 mm DC axial fan operating at 5 VDC. Its 5.3 m³/h airflow rating suits the stated equipment-cooling role. During compatibility checking, compare the model's electrical load. Reconcile the model code with the required electrical interface.
Read More
Specified at 12 VDC, MF25101V1-10000-A99 is a SUNON DC axial fan for telecom cabinets and network equipment in 25 × 25 × 10 mm dimensions. 14000 rpm is the model's most distinctive operating parameter. Use the documented application data when planning maintenance preparation. Confirm temperature and service-life limits from current data.
Read More
Within telecom cabinets and network equipment, SUNON MF25100V1-10000-A99 serves as a 25 × 25 × 10 mm DC axial fan operating at 5 VDC. Its 5.9 m³/h airflow rating suits the stated equipment-cooling role. Base maintenance preparation on the stated product configuration. Confirm temperature and service-life limits from current data.
Read More
The MF30060V2-10000-A99 is SUNON's 5 VDC, 30 × 30 × 6 mm DC axial fan option for telecom cabinets and network equipment. A listed input of 0.36 W is the model's notable electrical characteristic. Use the documented operating point when planning compatibility checking. Reconcile the model code with the required electrical interface.
Read More
Within telecom cabinets and network equipment, MF25150V3-10000-A99 provides a 25 × 25 × 15 mm, 5 VDC DC axial fan configuration. A listed input of 0.18 W is the model's notable electrical characteristic. Treat the dimensional envelope as a primary input to compatibility checking. Reconcile the model code with the required electrical interface.
Read More