

For compact cooling within telecom cabinets and network equipment, the MF60252V2-10000-A99 provides a 24 VDC DC axial fan configuration measuring 60 × 60 × 25 mm. A listed noise value of 22 dB is the model's key differentiator. Review its rated dataset during equipment integration. Request the exact performance curve for final engineering signoff.
| Rated Voltage(V) | 24 |
|---|---|
| Size(mm) | 60x60x25mm |
| Max.Air Flow(m³/h) | 32.8 |
| Max.Pressure(Pa) | 37.4 |
| Input Power(W) | 0.72 |
| Speed(rpm) | 3800 |
| Noise(db) | 22 |
The MF60252V2-10000-A99 from SUNON addresses cooling needs in telecommunications equipment. As a DC brushless axial fan, it creates a defined inlet-to-outlet route across the thermal load.
The listed 32.8 m3/h maximum airflow can support active component cooling. Designers should compare this value with enclosure pressure loss rather than rely on free-air performance alone. The matching document lists IP68 protection, providing a defined basis for environmental exposure review.
OEM teams specifying MF60252V2-10000-A99 should check airflow direction and complete airflow mapping before design lock. A documented interface review helps purchasing teams control fit, cooling continuity and replacement planning. Verify orientation so heated air does not recirculate through the inlet.
SUNON MF60252V2-10000-A99 serves security-camera equipment. Airflow around image sensors, processors and power circuits helps address heat inside compact camera housings. The fan gives OEM equipment a defined air route and supports stable video operation.
SUNON MF60252V2-10000-A99 serves video-recording equipment. Airflow around storage, processing and power assemblies helps address continuous recording workloads. The fan gives OEM equipment a defined air route and supports reliable monitoring service.
SUNON MF60252V2-10000-A99 serves security monitoring systems. Airflow around network and control electronics helps address round-the-clock equipment heat. The fan gives OEM equipment a defined air route and supports system availability. It supports reliable equipment cooling.
Speed-control capability is not stated for this complete part number. Confirm the signal and controller requirements before use.
Its documented 24 VDC rating and a listed noise value of 22 db is the model's key differentiator. allow comparison with the required duty point without assuming unlisted options.
The listed rating is 24 VDC. Verify polarity or mains frequency, wiring, and protection before commissioning.
Verify supply, wiring, obstructions, impeller movement, and protection status. Use the model datasheet before replacement or repair.
Yes. The worksheet lists up to 37.4 Pa; compare it with the system curve.

The MF30060V2-10000-A99 is SUNON's 5 VDC, 30 × 30 × 6 mm DC axial fan option for telecom cabinets and network equipment. A listed input of 0.36 W is the model's notable electrical characteristic. Use the documented operating point when planning compatibility checking. Reconcile the model code with the required electrical interface.
Read More
SUNON configures MF30060V1-10000-A99 as a 30 × 30 × 6 mm DC axial fan for telecom cabinets and network equipment, operating at 5 VDC. Its 8.3 m³/h airflow rating suits the stated equipment-cooling role. Review its pressure capability during compatibility checking. Reconcile the model code with the required electrical interface.
Read More
Within telecom cabinets and network equipment, MF25150V3-10000-A99 provides a 25 × 25 × 15 mm, 5 VDC DC axial fan configuration. A listed input of 0.18 W is the model's notable electrical characteristic. Treat the dimensional envelope as a primary input to compatibility checking. Reconcile the model code with the required electrical interface.
Read More
Designed for telecom cabinets and network equipment, SUNON MF25150V2-10000-A99 is a 5 VDC DC axial fan in a 25 × 25 × 15 mm frame. A listed input of 0.23 W is the model's notable electrical characteristic. Base compatibility checking on the stated acoustic value. Reconcile the model code with the required electrical interface.
Read More
Within telecom cabinets and network equipment, SUNON MF25150V1-10000-A99 serves as a 25 × 25 × 15 mm DC axial fan operating at 5 VDC. Its 5.3 m³/h airflow rating suits the stated equipment-cooling role. During compatibility checking, compare the model's electrical load. Reconcile the model code with the required electrical interface.
Read More
For telecom cabinets and network equipment, MF25101V3-10000-A99 combines 12 VDC operation with a 25 × 25 × 10 mm DC axial fan design. A listed input of 0.21 W is the model's notable electrical characteristic. The recorded speed benchmark should guide compatibility checking. Reconcile the model code with the required electrical interface.
Read More