

Built for telecom cabinets and network equipment, SUNON MF92251V2-10000-A99 uses a 92 × 92 × 25 mm DC axial fan arrangement at 12 VDC. Its 2700 rpm rating defines a lower-speed operating point. During cabinet ventilation planning, compare the model's frame geometry. Verify bearing and signal options in the exact datasheet.
| Rated Voltage(V) | 12 |
|---|---|
| Size(mm) | 92x92x25mm |
| Max.Air Flow(m³/h) | 76.5 |
| Max.Pressure(Pa) | 32.4 |
| Input Power(W) | 1.26 |
| Speed(rpm) | 2700 |
| Noise(db) | 32 |
SUNON MF92251V2-10000-A99 is a DC brushless axial fan for telecommunications equipment. It establishes forced airflow where passive cooling cannot adequately protect heat-producing assemblies.
The SUNON product series carries RoHS compliance and recognized safety approvals; buyers should confirm the approval marks for this exact suffix and target market. Rigid mounting and clear breathing space help control vibration, flow loss and the acoustic result of the complete assembly.
The final MF92251V2-10000-A99 selection should consider connector reach as part of the installation layout. Finishing power-budget review before design lock helps reduce integration uncertainty and supports reliable equipment cooling. Confirm that the mating lead reaches without tension or sharp bending.
SUNON MF92251V2-10000-A99 serves security-camera equipment. Airflow around image sensors, processors and power circuits helps address heat inside compact camera housings. The fan gives OEM equipment a defined air route and supports stable video operation.
SUNON MF92251V2-10000-A99 serves video-recording equipment. Airflow around storage, processing and power assemblies helps address continuous recording workloads. The fan gives OEM equipment a defined air route and supports reliable monitoring service.
SUNON MF92251V2-10000-A99 serves security monitoring systems. Airflow around network and control electronics helps address round-the-clock equipment heat. The fan gives OEM equipment a defined air route and supports system availability. It supports reliable equipment cooling.
Its documented 12 VDC rating and its 2700 rpm rating defines a lower-speed operating point. allow comparison with the required duty point without assuming unlisted options.
The listed rating is 12 VDC. Verify polarity or mains frequency, wiring, and protection before commissioning.
Verify supply, wiring, obstructions, impeller movement, and protection status. Use the model datasheet before replacement or repair.
Yes. The worksheet lists up to 32.4 Pa; compare it with the system curve.
The worksheet lists 1.26 W input. Check supply capacity and operating conditions before commissioning.

The MF30060V2-10000-A99 is SUNON's 5 VDC, 30 × 30 × 6 mm DC axial fan option for telecom cabinets and network equipment. A listed input of 0.36 W is the model's notable electrical characteristic. Use the documented operating point when planning compatibility checking. Reconcile the model code with the required electrical interface.
Read More
SUNON configures MF30060V1-10000-A99 as a 30 × 30 × 6 mm DC axial fan for telecom cabinets and network equipment, operating at 5 VDC. Its 8.3 m³/h airflow rating suits the stated equipment-cooling role. Review its pressure capability during compatibility checking. Reconcile the model code with the required electrical interface.
Read More
Within telecom cabinets and network equipment, MF25150V3-10000-A99 provides a 25 × 25 × 15 mm, 5 VDC DC axial fan configuration. A listed input of 0.18 W is the model's notable electrical characteristic. Treat the dimensional envelope as a primary input to compatibility checking. Reconcile the model code with the required electrical interface.
Read More
Designed for telecom cabinets and network equipment, SUNON MF25150V2-10000-A99 is a 5 VDC DC axial fan in a 25 × 25 × 15 mm frame. A listed input of 0.23 W is the model's notable electrical characteristic. Base compatibility checking on the stated acoustic value. Reconcile the model code with the required electrical interface.
Read More
Within telecom cabinets and network equipment, SUNON MF25150V1-10000-A99 serves as a 25 × 25 × 15 mm DC axial fan operating at 5 VDC. Its 5.3 m³/h airflow rating suits the stated equipment-cooling role. During compatibility checking, compare the model's electrical load. Reconcile the model code with the required electrical interface.
Read More
For telecom cabinets and network equipment, MF25101V3-10000-A99 combines 12 VDC operation with a 25 × 25 × 10 mm DC axial fan design. A listed input of 0.21 W is the model's notable electrical characteristic. The recorded speed benchmark should guide compatibility checking. Reconcile the model code with the required electrical interface.
Read More