

SUNON VG80561BX-1Q065-S9H combines a 80 × 80 × 56 mm DC blower platform with a 12 VDC rating for servers and data-center electronics. The supplied data list 78.6 dB, an important acoustic selection parameter. The recorded performance curve should guide technical purchasing. Request the exact performance curve for final engineering signoff.
| Rated Voltage(V) | 12 |
|---|---|
| Size(mm) | 80x80x56 |
| Max.Air Flow(m³/h) | 139 |
| Max.Pressure(Pa) | 9.57 |
| Speed(rpm) | 18000/15400 |
| Noise(db) | 78.6 |
SUNON VG80561BX-1Q065-S9H supports industrial equipment with DC brushless axial fan airflow. It is intended for installations where predictable air exchange is central to equipment stability.
The SUNON product series carries RoHS compliance and recognized safety approvals; buyers should confirm the approval marks for this exact suffix and target market. Correct airflow direction and inlet clearance help translate the documented operating point into reliable equipment-level cooling.
A dependable VG80561BX-1Q065-S9H installation starts with a review of exhaust separation. Complete prototype trials for service documentation to confirm compatibility, operating margin and the information needed for repeat orders. Use a representative assembly rather than an unrestricted bench setup.
The worksheet lists 78.6 dB. Installation distance, airflow resistance, and enclosure acoustics can change the measured result.
The supplied product-line reference discusses long-life cooling, but continuous-duty limits for this full suffix must be verified from its datasheet and operating conditions.
Yes. The worksheet lists up to 9.57 Pa; compare it with the system curve.
Use the listed voltage, size, 139 m³/h airflow, 18000/15400 rpm for preliminary comparison.
It is listed for servers and data-center electronics. Check dimensions, airflow, pressure, and the installation environment against the actual equipment.
The supplied row does not state the connector or lead configuration. Follow the model-specific wiring drawing.

Within servers and data-center electronics, VG80861BX-1Q07C-S9H provides a 80 × 80 × 86 mm, 12 VDC DC blower configuration. 156 W input is the defining electrical load in the supplied data. The recorded dimensional envelope should guide system commissioning. Verify bearing and signal options in the exact datasheet.
Read More
The VG80861BX-Q070-S9H is SUNON's 12 VDC, 80 × 80 × 86 mm DC blower option for servers and data-center electronics. The supplied data list 81.1 dB, an important acoustic selection parameter. For system commissioning, start with the supplied acoustic value. Verify bearing and signal options in the exact datasheet.
Read More
The 12 VDC SUNON VG80801BX-1Q014-S9H is a DC blower sized 80 × 80 × 80 mm for servers and data-center electronics. The supplied data list 80.5 dB, an important acoustic selection parameter. Base technical purchasing on the stated installation footprint. Request the exact performance curve for final engineering signoff.
Read More
Positioned for servers and data-center electronics, SUNON VG80561BX-Q140-S9H is a 12 VDC DC blower in a 80 × 80 × 56 mm frame. The supplied data list 77.3 dB, an important acoustic selection parameter. For technical purchasing, start with the supplied mounting size. Request the exact performance curve for final engineering signoff.
Read MoreThe VG80381BX-1Q010-S9H is SUNON's 12 VDC, 80 × 80 × 38 mm DC blower option for servers and data-center electronics. 18300 rpm is the model's most distinctive operating parameter. Treat the volume-flow figure as a primary input to technical purchasing. Request the exact performance curve for final engineering signoff.
Read More
VG60761BX-Q055-S9H addresses servers and data-center electronics through a 12 VDC DC blower platform measuring 60 × 60 × 76 mm. The supplied data list 81 dB, an important acoustic selection parameter. Use the documented cooling output when planning technical purchasing. Request the exact performance curve for final engineering signoff.
Read More