XG80864BX-1Q01C-S9T SUNON Axial Fan

Brand :: SUNON

Model:: XG80864BX-1Q01C-S9T | SUNON 54V 80x80x86mm 212.1m3/h DC Axial Fan for Industrial Cooling

Type:: Axial Fans

Industry:: Industrial Cooling

Description:: Within servers and data-center electronics, SUNON XG80864BX-1Q01C-S9T serves as a 80 × 80 × 86 mm DC blower operating at 54 VDC. Up to 212.1 m³/h is its most prominent listed performance figure. During system commissioning, compare the model's pressure capability. Verify bearing and signal options in the exact datasheet.

Datasheet:: XG80864BX-1Q01C-S9T | SUNON 54V 80x80x86mm 212.1m3/h DC Axial Fan for Industrial Cooling Datasheet (Pdf)

Product Features

Rated Voltage(V)	54
Size(mm)	80x80x86
Max.Air Flow(m³/h)	212.1
Max.Pressure(Pa)	11.05
Speed(rpm)	17000/15000
Noise(db)	TBD

Product Features

High Airflow Cooling

Equipment builders can integrate SUNON XG80864BX-1Q01C-S9T, a DC brushless axial fan, into industrial equipment. The design supplies the air movement required to carry component heat out of confined spaces.

The SUNON product series carries RoHS compliance and recognized safety approvals; buyers should confirm the approval marks for this exact suffix and target market. System resistance, grille geometry and cable clearance should be reviewed together to maintain predictable air delivery.

A dependable XG80864BX-1Q01C-S9T installation starts with a review of exhaust separation. Complete wiring verification for service documentation to confirm compatibility, operating margin and the information needed for repeat orders. Match polarity, leads and control functions to the equipment harness.

Application Industry

Industrial Equipment

SUNON XG80864BX-1Q01C-S9T serves industrial machinery and electronic equipment. Airflow around controllers, drives and power devices helps address continuous internal heat. The fan gives OEM equipment a defined air route and supports stable equipment operation.

Frequently Asked Questions

How can XG80864BX-1Q01C-S9T affect operating cost?

Compare its listed power requirement with the required airflow and run time. Total savings depend on the complete system duty point.

What speed is listed for XG80864BX-1Q01C-S9T?

The listed speed is 17000/15000 rpm. Confirm frequency, control method, and duty point for the installed system.

Is XG80864BX-1Q01C-S9T suitable for continuous operation?

The supplied product-line reference discusses long-life cooling, but continuous-duty limits for this full suffix must be verified from its datasheet and operating conditions.

What installation checks apply to XG80864BX-1Q01C-S9T?

Keep the airflow path clear, secure the frame without distortion, and follow the exact wiring diagram and voltage rating.

How should XG80864BX-1Q01C-S9T be matched to an enclosure?

Review its 80 × 80 × 86 mm size, 212.1 m³/h airflow, 11.05 Pa pressure, system resistance, and available mounting space.

What certification information is listed for XG80864BX-1Q01C-S9T?

The workbook marks the product as RoHS compliant. Confirm UL, TUV, VDE, or other project-specific approvals for the exact suffix.

Related Products

XG80801BX-1Q110-S9T | SUNON 12V 80x80x80mm 199.89m3/h DC Axial Fan for Industrial Cooling

Used in servers and data-center electronics, SUNON XG80801BX-1Q110-S9T is a 12 VDC DC blower in a 80 × 80 × 80 mm frame. Up to 199.89 m³/h is its most prominent listed performance figure. Review its cooling specification during technical purchasing. Request the exact performance curve for final engineering signoff.

XG80801BX-1Q030-S9T | SUNON 12V 126W 80x80x80mm 187.7m3/h DC Axial Fan for Industrial Cooling

Within servers and data-center electronics, SUNON XG80801BX-1Q030-S9T serves as a 80 × 80 × 80 mm DC blower operating at 12 VDC. The supplied data list 83.4 dB, an important acoustic selection parameter. Treat the duty-point values as a primary input to technical purchasing. Request the exact performance curve for final engineering signoff.

XG80561BX-1Q010-S9T | SUNON 12V 80x80x56mm 155.8m3/h DC Axial Fan for Industrial Cooling

Built for servers and data-center electronics, SUNON XG80561BX-1Q010-S9T uses a 80 × 80 × 56 mm DC blower arrangement at 12 VDC. The supplied data list 83.8 dB, an important acoustic selection parameter. Treat the suffix definition as a primary input to technical purchasing. Request the exact performance curve for final engineering signoff.

XG80561BX-1Q03C-S9T | SUNON 12V 80x80x56mm 163.5m3/h DC Axial Fan for Industrial Cooling

A 80 × 80 × 56 mm frame and 12 VDC rating define XG80561BX-1Q03C-S9T, a DC blower for servers and data-center electronics. 9.68 Pa maximum pressure is the standout documented duty-point value. During technical purchasing, compare the model's thermal-duty record. Request the exact performance curve for final engineering signoff.

XG60561BX-1Q451-S9T | SUNON 12V 120W 60x60x56mm 118.1m3/h DC Axial Fan for Industrial Cooling

SUNON configures XG60561BX-1Q451-S9T as a 60 × 60 × 56 mm DC blower for servers and data-center electronics, operating at 12 VDC. The supplied data list 87.6 dB, an important acoustic selection parameter. Treat the pressure capability as a primary input to technical purchasing. Request the exact performance curve for final engineering signoff.

XG60561BX-1Q162-S9T | SUNON 12V 82.8W 60x60x56mm 102.2m3/h DC Axial Fan for Industrial Cooling

SUNON XG60561BX-1Q162-S9T combines a 60 × 60 × 56 mm DC blower platform with a 12 VDC rating for servers and data-center electronics. The supplied data list 83.1 dB, an important acoustic selection parameter. Base technical purchasing on the stated dimensional envelope. Request the exact performance curve for final engineering signoff.

XG80864BX-1Q01C-S9T SUNON Axial Fan

XG80864BX-1Q01C-S9T SUNON Axial Fan

Product Features

Product Features

High Airflow Cooling

Application Industry

Industrial Equipment

Frequently Asked Questions

How can XG80864BX-1Q01C-S9T affect operating cost?

What speed is listed for XG80864BX-1Q01C-S9T?

Is XG80864BX-1Q01C-S9T suitable for continuous operation?

What installation checks apply to XG80864BX-1Q01C-S9T?

How should XG80864BX-1Q01C-S9T be matched to an enclosure?

What certification information is listed for XG80864BX-1Q01C-S9T?

Related Products

XG80801BX-1Q110-S9T | SUNON 12V 80x80x80mm 199.89m3/h DC Axial Fan for Industrial Cooling

XG80801BX-1Q030-S9T | SUNON 12V 126W 80x80x80mm 187.7m3/h DC Axial Fan for Industrial Cooling

XG80561BX-1Q010-S9T | SUNON 12V 80x80x56mm 155.8m3/h DC Axial Fan for Industrial Cooling

XG80561BX-1Q03C-S9T | SUNON 12V 80x80x56mm 163.5m3/h DC Axial Fan for Industrial Cooling

XG60561BX-1Q451-S9T | SUNON 12V 120W 60x60x56mm 118.1m3/h DC Axial Fan for Industrial Cooling

XG60561BX-1Q162-S9T | SUNON 12V 82.8W 60x60x56mm 102.2m3/h DC Axial Fan for Industrial Cooling

Message Form