

For AHU and precision air-conditioning layouts, GTM045PBV36R offers a listed 460 mm EC centrifugal fan format. The three-phase 380-480VAC model has a 3570 rpm speed specification and 6000 W listed input.
| Rated Voltage(V) | 3~380-480 |
|---|---|
| Size(mm) | 460 |
| Max.Air Flow(m³/h) | 11485 |
| Input Power(W) | 6000 |
| Speed(rpm) | 3570 |
For precision cooling equipment, the GTM045PBV36R from Delta is an EC centrifugal fan that supports active thermal management. A planned inlet-to-outlet route helps the installation carry component heat away.
The listed 6000 W power rating is relevant to supply sizing and the system energy budget; actual consumption depends on the operating duty. The centrifugal format directs air into the equipment flow path, making duct transitions and outlet alignment important to usable cooling performance. A controlled exhaust route limits recirculation, allowing the delivered air to carry heat away rather than return to the inlet.
Equipment manufacturers and maintenance teams should match the complete part number and installation limits for reliable operation across the service cycle.
For air-handling units, Delta GTM045PBV36R provides equipment cooling around internal air passages and heat-exchange sections. Managing the need for controlled air circulation helps maintain stable ventilation delivery.
In precision cooling equipment, air movement helps handle continuous temperature-control demand. Delta GTM045PBV36R supports cooling around heat-exchange sections, contributing to stable environmental conditions.
6000 W is shown in the filter data. Check whether the corresponding datasheet defines it as rated, free-air or maximum-load input before sizing the power source.
Serviceability depends on access, connector choice and mounting. Plan isolation and cleaning access, inspect the airflow path, and use the manufacturer's replacement guidance rather than attempting an unsupported repair.
No maximum-pressure value is present in the filter row. Match the exact-model curve to the system resistance before using the fan in a restricted airflow path.
GTM045PBV36R is listed for AHU and Precision AC. Confirm the installed airflow demand, pressure loss and ambient conditions before approval.
3~380-480VAC is listed for GTM045PBV36R. Verify the allowable input range, phase, frequency where applicable, polarity and wiring diagram in the exact specification.
The listed input-power figure is 6000 W, but efficiency must be evaluated at the required airflow and pressure. Check the applicable fan curve and test conditions before comparison.

GTM056PUT34R is listed for three-phase 380-480VAC as an EC centrifugal fan for AHU cooling. Its 1550 rpm speed identifies a slower option than several smaller GTM entries; the supplied size is 560 mm.
Read More
GTM045PUV36R is listed as a three-phase 380-480VAC EC centrifugal fan for precision AC and AHUs. A 6000 W input is the key supply-sizing figure; the 450 mm entry must be checked against the final assembly drawing.
Read More
GTM056PBT34R combines a 565 mm EC centrifugal fan format with three-phase 380-480VAC operation for AHUs and precision AC. Its listed 1550 rpm speed is paired with 14068 m3/h maximum airflow and 3100 W input.
Read More
The GTM036PBS32R is an EC centrifugal fan listed for three-phase 380-480VAC in AHU and precision cooling systems. Its 360 mm format is specified at 3650 rpm, with 5060 m3/h maximum airflow in the table.
Read More
GTM050HBT34R provides EC centrifugal fan airflow for AHUs and precision air conditioning on three-phase 380-480VAC. A 500 mm format and 1820 rpm speed accompany its listed maximum airflow of 12908.1 m3/h.
Read More
A listed 560 mm size defines GTM056HBT34R for AHUs and precision air conditioning. This EC centrifugal fan uses a three-phase 380-480VAC supply; model-specific interface and performance details need confirmation.
Read More