

GTM056PUT34R is listed for three-phase 380-480VAC as an EC centrifugal fan for AHU cooling. Its 1550 rpm speed identifies a slower option than several smaller GTM entries; the supplied size is 560 mm.
| Rated Voltage(V) | 3~ 380-480 |
|---|---|
| Size(mm) | 560 |
| Max.Air Flow(m³/h) | 14068 |
| Input Power(W) | 3100 |
| Speed(rpm) | 1550 |
In precision cooling equipment, Delta GTM056PUT34R supplies the forced-air element of the cooling system. As an EC centrifugal fan, it is intended for integration into a defined mechanical and electrical assembly.
A listed speed of 1550 rpm helps define the operating profile when reviewing airflow demand, mechanical mounting and the enclosure's acoustic target. The centrifugal format directs air into the equipment flow path, making duct transitions and outlet alignment important to usable cooling performance.
For OEM design-in and replacement sourcing, confirm the full suffix, connector and mounting pattern to support dependable service in the intended assembly. The final assembly should be tested under its expected thermal load.
For air-handling units, Delta GTM056PUT34R provides equipment cooling around internal air passages and heat-exchange sections. Managing the need for controlled air circulation helps maintain stable ventilation delivery.
In precision cooling equipment, air movement helps handle continuous temperature-control demand. Delta GTM056PUT34R supports cooling around heat-exchange sections, contributing to stable environmental conditions.
GTM056PUT34R is listed for AHU and Precision AC. Confirm the installed airflow demand, pressure loss and ambient conditions before approval.
3100 W is shown in the filter data. Check whether the corresponding datasheet defines it as rated, free-air or maximum-load input before sizing the power source.
Allow for the listed 560 mm size and follow the exact mounting drawing. Keep inlet and outlet clear, use the specified fasteners and verify wiring before energizing the fan.
Isolate power first. Verify the approved supply, connector, polarity or phase, control-enable input and any obstruction; follow the exact specification and do not bypass protection circuits.
No maximum-pressure value is present in the filter row. Match the exact-model curve to the system resistance before using the fan in a restricted airflow path.
GTM056PUT34R provides a defined centrifugal fan format with a listed 1550 rpm speed in a 560 mm size. Compare its fan curve with the actual duty point rather than assuming a universal advantage.

GTM045PUV36R is listed as a three-phase 380-480VAC EC centrifugal fan for precision AC and AHUs. A 6000 W input is the key supply-sizing figure; the 450 mm entry must be checked against the final assembly drawing.
Read More
GTM056PBT34R combines a 565 mm EC centrifugal fan format with three-phase 380-480VAC operation for AHUs and precision AC. Its listed 1550 rpm speed is paired with 14068 m3/h maximum airflow and 3100 W input.
Read More
For AHU and precision air-conditioning layouts, GTM045PBV36R offers a listed 460 mm EC centrifugal fan format. The three-phase 380-480VAC model has a 3570 rpm speed specification and 6000 W listed input.
Read More
GTM050HBT34R provides EC centrifugal fan airflow for AHUs and precision air conditioning on three-phase 380-480VAC. A 500 mm format and 1820 rpm speed accompany its listed maximum airflow of 12908.1 m3/h.
Read More
A listed 560 mm size defines GTM056HBT34R for AHUs and precision air conditioning. This EC centrifugal fan uses a three-phase 380-480VAC supply; model-specific interface and performance details need confirmation.
Read More
GTM063PBV41R is an EC centrifugal fan for AHUs and precision air conditioning, listed for three-phase 380-480VAC. Its 630 mm size and 20970 m3/h maximum airflow distinguish the 1900 rpm assembly.
Read More