







Within commercial refrigeration and refrigerator cooling, SUNON DP200A2123XBL.GN serves as a 120 × 120 × 38 mm AC axial fan operating at 220 ~ 240 VAC. Up to 198.9 m³/h is its most prominent listed performance figure. Use the documented thermal-duty record when planning wiring review. Confirm environmental protection for the ordered version.
| Rated Voltage(V) | 220 ~ 240 |
|---|---|
| Size(mm) | 120*120*38 |
| Max.Air Flow(m³/h) | 198.9 |
| Max.Pressure(Pa) | 97.1 |
| Input Power(W) | 21 |
| Speed(rpm) | 3150 |
| Noise(db) | 50 |
Designed for HVAC and ventilation equipment, the SUNON DP200A2123XBL.GN provides AC axial fan cooling in a format suited to equipment integration. It helps limit local heat buildup during operation.
The AC motor format supports direct integration with the stated supply, while the exact bearing, frequency and protection configuration remain tied to the complete part number. Correct airflow direction and inlet clearance help translate the documented operating point into reliable equipment-level cooling.
For an orderly design-in process, assess vibration transfer around DP200A2123XBL.GN and perform airflow mapping before ordering. The result is a clearer cooling specification for engineering, purchasing and maintenance teams. Review circulation around the components most sensitive to heat.
SUNON DP200A2123XBL.GN serves HVAC equipment. Airflow around control and heat-exchange sections helps address continuous heating and cooling loads. The fan gives OEM equipment a defined air route and supports stable air-conditioning operation. It supports reliable equipment cooling.
SUNON DP200A2123XBL.GN serves industrial ventilation systems. Airflow around equipment air passages and thermal assemblies helps address continuous airflow demand. The fan gives OEM equipment a defined air route and supports controlled air circulation.
SUNON DP200A2123XBL.GN serves heat-exchange equipment. Airflow around coil and exchanger surfaces helps address transferred thermal energy. The fan gives OEM equipment a defined air route and supports effective heat rejection. It supports reliable equipment cooling.
Yes. The worksheet lists up to 97.1 Pa; compare it with the system curve.
The worksheet lists 21 W input. Check supply capacity and operating conditions before commissioning.
Assess reliability from the exact bearing, temperature, protection, and life data. The supplied series note alone does not confirm every suffix-specific option.
Confirm any missing bearing, connector, control, IP rating, life, certification, and performance-curve details for the complete part number.
Match voltage, dimensions, mounting, airflow direction, airflow, pressure, connector, control signal, and protection before substitution.
Its documented 220 ~ 240 VAC rating and up to 198.9 m³/h is its most prominent listed performance figure. allow comparison with the required duty point without assuming unlisted options.

The DP200A 2123XBL.GN is SUNON's 220 VAC, 120 × 120 × 38 mm AC axial fan option for commercial refrigeration and refrigerator cooling. 21 W input is the defining electrical load in the supplied data. Base replacement evaluation on the stated airflow profile. Check the full suffix before confirming connector details.
Read More
Within commercial refrigeration and refrigerator cooling, SUNON DP203A/2123LBL.GN serves as a 120 × 120 × 38 mm AC axial fan operating at 220-240VAC VAC. Its 2150 rpm rating defines a lower-speed operating point. Base airflow-path design on the stated frame geometry. Obtain the applicable curve before final duty-point approval.
Read More
The 120 × 120 × 38 mm DP200A 2123XBT.GN brings 220 VAC AC axial fan cooling to commercial refrigeration and refrigerator cooling. 22 W input is the defining electrical load in the supplied data. Use the documented technical profile when planning replacement evaluation. Check the full suffix before confirming connector details.
Read More
DP201AT 2122HBL.GN addresses commercial refrigeration and refrigerator cooling through a 220/240 VAC AC axial fan platform measuring 120 × 120 × 25 mm. Its 2500 rpm rating defines a lower-speed operating point. Treat the cooling output as a primary input to service-life planning. Check the ordering suffix before assigning control functions.
Read More
The DP201AT/2122HBL GN is SUNON's 220-240VAC VAC, 119 × 119 × 25.5 mm AC axial fan option for commercial refrigeration and refrigerator cooling. Its 2500 rpm rating defines a lower-speed operating point. For system-resistance review, start with the supplied cooling specification. Use current model documentation to validate protection choices.
Read More