EF50151B1-C05C-A99 SUNON Blower Fan

Brand :: SUNON

Model:: EF50151B1-C05C-A99 | SUNON 12V 1.28W 50x50x15mm DC Centrifugal Blower for Industrial Cooling

Type:: Blower Fans

Industry:: Industrial Cooling

Description:: Specified at 12 VDC, EF50151B1-C05C-A99 is a SUNON DC blower for telecom cabinets, base stations, and network equipment in 50 × 50 × 15 mm dimensions. Its 7.6 m³/h airflow rating suits the stated equipment-cooling role. Treat the application data as a primary input to mounting verification. Validate mounting and wiring from the model drawing.

Datasheet:: EF50151B1-C05C-A99 | SUNON 12V 1.28W 50x50x15mm DC Centrifugal Blower for Industrial Cooling Datasheet (Pdf)

Product Features

Rated Voltage(V)	12
Size(mm)	50x50x15mm
Max.Air Flow(m³/h)	7.6
Max.Pressure(Pa)	166.9
Input Power(W)	1.28
Speed(rpm)	5200
Noise(db)	41

Product Features

Directed Air Cooling

The EF50151B1-C05C-A99 from SUNON addresses cooling needs in industrial equipment. As a DC brushless blower, it creates a defined inlet-to-outlet route across the thermal load.

The SUNON product series carries RoHS compliance and recognized safety approvals; buyers should confirm the approval marks for this exact suffix and target market. The enclosure should direct air across the heat source because bypass flow can reduce cooling even when the fan runs normally.

To integrate EF50151B1-C05C-A99 effectively, review outlet geometry at equipment level and arrange system-resistance review during prototype approval. Confirmed system compatibility supports stable cooling and repeatable procurement. Preserve a clear discharge region to avoid unnecessary downstream turbulence.

Application Industry

Industrial Equipment

SUNON EF50151B1-C05C-A99 serves industrial machinery and electronic equipment. Airflow around controllers, drives and power devices helps address continuous internal heat. The fan gives OEM equipment a defined air route and supports stable equipment operation.

Frequently Asked Questions

Is EF50151B1-C05C-A99 compatible with a replacement fan?

Match voltage, dimensions, mounting, airflow direction, airflow, pressure, connector, control signal, and protection before substitution.

How can EF50151B1-C05C-A99 affect operating cost?

Compare its listed 1.28 W input with the required airflow and run time. Total savings depend on the complete system duty point.

What voltage is required by EF50151B1-C05C-A99?

The listed rating is 12 VDC. Verify polarity or mains frequency, wiring, and protection before commissioning.

What airflow value is listed for EF50151B1-C05C-A99?

The worksheet lists up to 7.6 m³/h. Verify the operating point against system resistance.

What bearing information is confirmed for EF50151B1-C05C-A99?

The exact bearing option is not confirmed by the row-level data. Check the complete suffix in the current SUNON specification.

Related Products

EF40201BX-D03C-A99 | SUNON 12V 0.74W 40x40x20mm 6800rpm DC Axial Fan for Industrial Cooling

SUNON EF40201BX-D03C-A99 combines a 40 × 40 × 20 mm DC axial fan platform with a 12 VDC rating for telecom cabinets, base stations, and network equipment. A listed input of 0.74 W is the model's notable electrical characteristic. For controller selection, start with the supplied performance curve. Treat bearing and life data as suffix-specific.

EF50151B1-C03C-A99 | SUNON 12V 1.28W 50x50x15mm DC Centrifugal Blower for Industrial Cooling

The EF50151B1-C03C-A99 is SUNON's 12 VDC, 50 × 50 × 15 mm DC blower option for telecom cabinets, base stations, and network equipment. Its 7.6 m³/h airflow rating suits the stated equipment-cooling role. Treat the operating point as a primary input to controller selection. Treat bearing and life data as suffix-specific.

EF50100B3-C01C-A99 | SUNON 5V 0.61W 50x50x10mm DC Axial Fan for Industrial Cooling

SUNON configures EF50100B3-C01C-A99 as a 50 × 50 × 10 mm DC blower for telecom cabinets, base stations, and network equipment, operating at 5 VDC. A listed input of 0.61 W is the model's notable electrical characteristic. During mounting verification, compare the model's performance curve. Validate mounting and wiring from the model drawing.

EF50151BX-1C02C-A99 | SUNON 12V 1.8W 50x50x15mm DC Centrifugal Blower for Industrial Cooling

The EF50151BX-1C02C-A99 is SUNON's 12 VDC, 50 × 50 × 15 mm DC blower option for telecom cabinets, base stations, and network equipment. Its 9.2 m³/h airflow rating suits the stated equipment-cooling role. The recorded mounting size should guide mounting verification. Validate mounting and wiring from the model drawing.

EF50151B1-C02C-A99 | SUNON 12V 1.28W 50x50x15mm DC Centrifugal Blower for Industrial Cooling

EF50151B1-C02C-A99 addresses telecom cabinets, base stations, and network equipment through a 12 VDC DC blower platform measuring 50 × 50 × 15 mm. Its 7.6 m³/h airflow rating suits the stated equipment-cooling role. Base airflow-path design on the stated product configuration. Obtain the applicable curve before final duty-point approval.

EF50151B2-C03C-A99 | SUNON 12V 0.65W 50x50x15mm DC Centrifugal Blower for Industrial Cooling

SUNON EF50151B2-C03C-A99 combines a 50 × 50 × 15 mm DC blower platform with a 12 VDC rating for telecom cabinets, base stations, and network equipment. Its 5.9 m³/h airflow rating suits the stated equipment-cooling role. During airflow-path design, compare the model's system interface. Obtain the applicable curve before final duty-point approval.

EF50151B1-C05C-A99 SUNON Blower Fan

EF50151B1-C05C-A99 SUNON Blower Fan

Product Features

Product Features

Directed Air Cooling

Application Industry

Industrial Equipment

Frequently Asked Questions

Is EF50151B1-C05C-A99 compatible with a replacement fan?

How can EF50151B1-C05C-A99 affect operating cost?

What voltage is required by EF50151B1-C05C-A99?

What airflow value is listed for EF50151B1-C05C-A99?

What bearing information is confirmed for EF50151B1-C05C-A99?

Related Products

EF40201BX-D03C-A99 | SUNON 12V 0.74W 40x40x20mm 6800rpm DC Axial Fan for Industrial Cooling

EF50151B1-C03C-A99 | SUNON 12V 1.28W 50x50x15mm DC Centrifugal Blower for Industrial Cooling

EF50100B3-C01C-A99 | SUNON 5V 0.61W 50x50x10mm DC Axial Fan for Industrial Cooling

EF50151BX-1C02C-A99 | SUNON 12V 1.8W 50x50x15mm DC Centrifugal Blower for Industrial Cooling

EF50151B1-C02C-A99 | SUNON 12V 1.28W 50x50x15mm DC Centrifugal Blower for Industrial Cooling

EF50151B2-C03C-A99 | SUNON 12V 0.65W 50x50x15mm DC Centrifugal Blower for Industrial Cooling

Message Form