







Within commercial refrigeration and refrigerator cooling, SUNON SF23080AT 2082HBL.GN serves as a 80 × 80 × 25 mm AC axial fan operating at 220 VAC. Its 2900 rpm rating defines a lower-speed operating point. Review its frame geometry during service-life planning. Check the ordering suffix before assigning control functions.
| Rated Voltage(V) | 220 |
|---|---|
| Size(mm) | 80*80*25 |
| Input Power(W) | 13.5 |
| Speed(rpm) | 2900 |
For refrigeration equipment, SUNON SF23080AT 2082HBL.GN serves as an AC axial fan. The fan supports temperature control in equipment that runs through sustained or repeated duty cycles.
The AC motor format supports direct integration with the stated supply, while the exact bearing, frequency and protection configuration remain tied to the complete part number.
The final SF23080AT 2082HBL.GN selection should consider connector reach as part of the installation layout. Finishing duty-point validation within OEM validation helps reduce integration uncertainty and supports reliable equipment cooling. Record the intended operating point on the system resistance curve. The final assembly should be tested under its expected thermal load.
SUNON SF23080AT 2082HBL.GN serves commercial refrigeration equipment. Airflow around cabinet electronics and heat-exchange sections helps address recurring refrigeration loads. The fan gives OEM equipment a defined air route and supports stable temperature control.
SUNON SF23080AT 2082HBL.GN serves refrigerators and cold-storage equipment. Airflow around internal electronics and air passages helps address uneven thermal conditions. The fan gives OEM equipment a defined air route and supports reliable cooling operation.
SUNON SF23080AT 2082HBL.GN serves medical refrigeration equipment. Airflow around temperature-control electronics and heat exchangers helps address continuous cooling demand. The fan gives OEM equipment a defined air route and supports controlled storage conditions.
The listed speed is 2900 rpm. Confirm frequency, control method, and duty point for the installed system.
The supplied row has no airflow value; obtain the current performance curve before selection.
The exact bearing option is not confirmed by the row-level data. Check the complete suffix in the current SUNON specification.
Review its 80 × 80 × 25 mm size, system resistance, and available mounting space.
Assess reliability from the exact bearing, temperature, protection, and life data. The supplied series note alone does not confirm every suffix-specific option.
Confirm any missing bearing, connector, control, IP rating, life, certification, and performance-curve details for the complete part number.

Built around commercial refrigeration and refrigerator cooling, SUNON SF23080A2083HBL.GN is a 220/240 VAC AC axial fan in a 80 × 80 × 38 mm frame. Its 2850 rpm rating defines a lower-speed operating point. The recorded model record should guide procurement comparison. Use the latest specification for frequency and tolerance limits.
Read More
The SF23092A/2092HBL GN is SUNON's 240VAC VAC, 91.5 × 91.5 × 25.5 mm AC axial fan option for commercial refrigeration and refrigerator cooling. Its 2850 rpm rating defines a lower-speed operating point. Treat the ventilation capacity as a primary input to acoustic assessment. Match the exact part number before approving a substitute.
Read More
Positioned for commercial refrigeration and refrigerator cooling, SUNON SF23080AT/2082HBL.GN is a 240VAC VAC AC axial fan in a 80 × 80 × 25.5 mm frame. Its 2900 rpm rating defines a lower-speed operating point. Review its cooling specification during power-budget planning. Confirm control inputs against the complete ordering code.
Read More
Within commercial refrigeration and refrigerator cooling, SUNON SF23080A 2083HBL.GN serves as a 80 × 80 × 38 mm AC axial fan operating at 240 VAC. Its 2850 rpm rating defines a lower-speed operating point. Treat the thermal-duty record as a primary input to system-resistance review. Use current model documentation to validate protection choices.
Read More