The SF23092A/2092HBL GN is SUNON's 240VAC VAC, 91.5 × 91.5 × 25.5 mm AC axial fan option for commercial refrigeration and refrigerator cooling. Its 2850 rpm rating defines a lower-speed operating point. Treat the ventilation capacity as a primary input to acoustic assessment. Match the exact part number before approving a substitute.
| Rated Voltage(V) | 240VAC |
|---|---|
| Size(mm) | 91.5x91.5x25.5 |
| Max.Air Flow(m³/h) | 62.9 |
| Max.Pressure(Pa) | 47.3 |
| Input Power(W) | 14 |
| Speed(rpm) | 2850 |
| Noise(db) | 40 |
Designed for HVAC and ventilation equipment, the SUNON SF23092A/2092HBL GN provides AC axial fan cooling in a format suited to equipment integration. It helps limit local heat buildup during operation.
The AC motor format supports direct integration with the stated supply, while the exact bearing, frequency and protection configuration remain tied to the complete part number.
To integrate SF23092A/2092HBL GN effectively, review outlet geometry at equipment level and arrange acoustic evaluation during prototype approval. Confirmed system compatibility supports stable cooling and repeatable procurement. Measure sound after mounting because the enclosure changes transmission. The final assembly should be tested under its expected thermal load.
SUNON SF23092A/2092HBL GN serves HVAC equipment. Airflow around control and heat-exchange sections helps address continuous heating and cooling loads. The fan gives OEM equipment a defined air route and supports stable air-conditioning operation. It supports reliable equipment cooling.
SUNON SF23092A/2092HBL GN serves industrial ventilation systems. Airflow around equipment air passages and thermal assemblies helps address continuous airflow demand. The fan gives OEM equipment a defined air route and supports controlled air circulation.
SUNON SF23092A/2092HBL GN serves heat-exchange equipment. Airflow around coil and exchanger surfaces helps address transferred thermal energy. The fan gives OEM equipment a defined air route and supports effective heat rejection. It supports reliable equipment cooling.
The worksheet lists up to 62.9 m³/h. Verify the operating point against system resistance.
Yes. The worksheet lists up to 47.3 Pa; compare it with the system curve.
Review its 91.5 × 91.5 × 25.5 mm size, 62.9 m³/h airflow, 47.3 Pa pressure, system resistance, and available mounting space.
It is listed for commercial refrigeration and refrigerator cooling. Check dimensions, airflow, pressure, and the installation environment against the actual equipment.
Confirm any missing bearing, connector, control, IP rating, life, certification, and performance-curve details for the complete part number.
Speed-control capability is not stated for this complete part number. Confirm the signal and controller requirements before use.