GTM050EUD19E Delta Centrifugal Fan

Brand :: Delta

Model:: GTM050EUD19E | Delta Electronics 3~380-480VAC EC Centrifugal Fan for AHU and Precision AC

Type:: Centrifugal Fans

Industry:: HVAC & Ventilation

Description:: GTM050EUD19E is listed for three-phase 380-480VAC operation as an EC centrifugal fan for AHUs and precision air conditioning. Its 500 mm size is documented; further performance details require the exact datasheet.

Product Features

Rated Voltage(V)	3~380-480
Size(mm)	500

Product Features

EC Air Management

In precision cooling equipment, Delta GTM050EUD19E supplies the forced-air element of the cooling system. As an EC centrifugal fan, it is intended for integration into a defined mechanical and electrical assembly.

The 3~380-480 V AC supply requirement gives electrical designers a clear basis for matching the fan to the equipment power architecture. The centrifugal format directs air into the equipment flow path, making duct transitions and outlet alignment important to usable cooling performance. Selecting the operating point against real pressure loss helps avoid oversizing and keeps thermal design focused on useful air delivery.

OEM purchasers can specify this model after checking the thermal duty, supply and mechanical fit, keeping reliable equipment operation central to selection.

Application Industry

Air Handling Units

Delta GTM050EUD19E serves air-handling units, helping remove heat from internal air passages and heat-exchange sections. Controlled air circulation supports stable ventilation delivery during equipment operation.

Precision Cooling

In precision cooling equipment, Delta GTM050EUD19E helps remove heat from heat-exchange sections. The cooling solution addresses continuous temperature-control demand to support stable environmental conditions.

Frequently Asked Questions

How should noise from GTM050EUD19E be evaluated?

Use the exact-model acoustic data, but compare values only under matching test conditions. Installed noise also depends on speed, restriction, resonance and enclosure geometry.

What installation space is required for GTM050EUD19E?

The workbook lists 500 mm. Confirm overall depth, hole pattern, connector clearance and guard or inlet-ring dimensions in the exact mechanical drawing.

What supply voltage should be used for GTM050EUD19E?

3~380-480VAC is listed for GTM050EUD19E. Verify the allowable input range, phase, frequency where applicable, polarity and wiring diagram in the exact specification.

What equipment is GTM050EUD19E intended to cool?

GTM050EUD19E is listed for AHU and Precision AC. Confirm the installed airflow demand, pressure loss and ambient conditions before approval.

Can GTM050EUD19E run continuously in 24/7 equipment?

The supplied filter data does not establish an unconditional 24/7 rating. Confirm bearing life, temperature range, duty cycle and derating in the exact datasheet, then validate system-level redundancy.

Related Products

GTM031FUC20R | Delta Electronics 200-277VAC 530W EC Centrifugal Fan for AHU and Precision AC

GTM031FUC20R is a nominal 230VAC EC centrifugal fan for AHUs and precision air conditioning. Its PDF specifies RS485 communication and an alarm relay, with 734 Pa maximum pressure and a 2500 rpm speed.

GTM056PUT34R | Delta Electronics 3~380-480VAC 3100W EC Centrifugal Fan for AHU and Precision AC

GTM056PUT34R is listed for three-phase 380-480VAC as an EC centrifugal fan for AHU cooling. Its 1550 rpm speed identifies a slower option than several smaller GTM entries; the supplied size is 560 mm.

GTM045PUV36R | Delta Electronics 3~380-480VAC 6000W EC Centrifugal Fan for AHU and Precision AC

GTM045PUV36R is listed as a three-phase 380-480VAC EC centrifugal fan for precision AC and AHUs. A 6000 W input is the key supply-sizing figure; the 450 mm entry must be checked against the final assembly drawing.

GTM056PBT34R | Delta Electronics 3~380-480VAC 3100W EC Centrifugal Fan for AHU and Precision AC

GTM056PBT34R combines a 565 mm EC centrifugal fan format with three-phase 380-480VAC operation for AHUs and precision AC. Its listed 1550 rpm speed is paired with 14068 m3/h maximum airflow and 3100 W input.

GTM045PBV36R | Delta Electronics 3~380-480VAC 6000W EC Centrifugal Fan for AHU and Precision AC

For AHU and precision air-conditioning layouts, GTM045PBV36R offers a listed 460 mm EC centrifugal fan format. The three-phase 380-480VAC model has a 3570 rpm speed specification and 6000 W listed input.

GTM036PBS32R | Delta Electronics 3~380-480VAC 3650W EC Centrifugal Fan for AHU and Precision AC

The GTM036PBS32R is an EC centrifugal fan listed for three-phase 380-480VAC in AHU and precision cooling systems. Its 360 mm format is specified at 3650 rpm, with 5060 m3/h maximum airflow in the table.

GTM050EUD19E Delta Centrifugal Fan

GTM050EUD19E Delta Centrifugal Fan

Product Features

Product Features

EC Air Management

Application Industry

Air Handling Units

Precision Cooling

Frequently Asked Questions

How should noise from GTM050EUD19E be evaluated?

What installation space is required for GTM050EUD19E?

What supply voltage should be used for GTM050EUD19E?

What equipment is GTM050EUD19E intended to cool?

Can GTM050EUD19E run continuously in 24/7 equipment?

Related Products

GTM031FUC20R | Delta Electronics 200-277VAC 530W EC Centrifugal Fan for AHU and Precision AC

GTM056PUT34R | Delta Electronics 3~380-480VAC 3100W EC Centrifugal Fan for AHU and Precision AC

GTM045PUV36R | Delta Electronics 3~380-480VAC 6000W EC Centrifugal Fan for AHU and Precision AC

GTM056PBT34R | Delta Electronics 3~380-480VAC 3100W EC Centrifugal Fan for AHU and Precision AC

GTM045PBV36R | Delta Electronics 3~380-480VAC 6000W EC Centrifugal Fan for AHU and Precision AC

GTM036PBS32R | Delta Electronics 3~380-480VAC 3650W EC Centrifugal Fan for AHU and Precision AC

Message Form