

GTB036PUD25E N1 is a 400VAC EC centrifugal fan for server cooling. A listed 919 Pa maximum pressure complements its 360 x 250 mm envelope and 2200 rpm rating, supporting comparison of ducted cooling designs.
| Rated Voltage(V) | 400 |
|---|---|
| Size(mm) | ψ360 x 250 |
| Max.Air Flow(m³/h) | 5573 |
| Max.Pressure(Pa) | 919 |
| Input Power(W) | 1000 |
| Speed(rpm) | 2200 |
| Noise(db) | 81 |
Equipment manufacturers evaluating server and storage equipment can consider Delta GTB036PUD25E N1, an EC centrifugal fan. The fan supports heat removal by keeping air moving through the selected cooling path.
Its listed ψ360 x 250 mm format defines the space needed for installation, helping designers reserve room for adjacent components and cable routing. Electronic commutation is part of the EC motor architecture; speed-control inputs must be checked against the complete electrical specification. Good inlet spacing helps reduce turbulence, which matters when balancing usable cooling capacity against installed sound levels.
For procurement, retain the complete model code and check the interface against the drawing; this supports repeatable assembly and accurate replacement ordering.
In precision cooling equipment, air movement helps handle continuous temperature-control demand. Delta GTB036PUD25E N1 supports cooling around heat-exchange sections, contributing to stable environmental conditions.
Delta GTB036PUD25E N1 serves server and storage equipment, helping remove heat from processors, drives and other heat-producing assemblies. Airflow supports stable equipment temperatures.
In telecommunications equipment, Delta GTB036PUD25E N1 helps remove heat from densely arranged electronic assemblies. The cooling solution addresses continuous communication duty to support service continuity.
2200 rpm is listed in the workbook. This value alone does not establish adjustable-speed capability; confirm the control input and permitted operating range in the exact datasheet.
Isolate power first. Verify the approved supply, connector, polarity or phase, control-enable input and any obstruction; follow the exact specification and do not bypass protection circuits.
The workbook lists ψ360 x 250 mm. Confirm overall depth, hole pattern, connector clearance and guard or inlet-ring dimensions in the exact mechanical drawing.
The supplied filter data does not establish an unconditional 24/7 rating. Confirm bearing life, temperature range, duty cycle and derating in the exact datasheet, then validate system-level redundancy.
GTB036PUD25E N1 is listed for Server cooling. Confirm the installed airflow demand, pressure loss and ambient conditions before approval.
The workbook lists a maximum airflow of 5573 m3/h. This is not the airflow at every system resistance; use the applicable pressure-flow curve to identify the installed operating point.

GTB040PUD26R-M002 is a 400VAC EC centrifugal fan for server ventilation. Its supplied 404 mm diameter and 256.6 mm depth accompany a 1850 rpm speed, with 6004.4 m3/h maximum airflow listed.
Read More
With 1260 m3/h maximum airflow, GTB023EUG10R-V E1 serves server cooling as a nominal 230VAC EC centrifugal fan. Its PDF documents soft start and locked-rotor protection, plus 0-10V/PWM speed control.
Read More
For server cooling, GTB023EUG10R-VE1 combines nominal 230VAC EC centrifugal fan operation with 0-10V/PWM speed control. The PDF specifies 135 W at free air and 180 W at maximum load, clarifying its power profile.
Read More
GTB031FUC20R N1 is a nominal 230VAC EC centrifugal fan for server cooling. RS485 control and voltage/current monitoring are documented in its PDF, alongside 3014 m3/h maximum airflow and a 2500 rpm speed.
Read More
GTB050PUT33R E1 pairs a 500 mm centrifugal fan format with EC drive for server ventilation. The 400VAC model lists 12286 m3/h maximum airflow and 1145 Pa maximum pressure, with 3100 W input specified.
Read More
GTB036PCN25R-M E1 is an EC centrifugal fan for server cooling, rated at three-phase 230/400VAC. Its PDF documents 0-10V, PWM and 4-20mA inputs plus RS485 Modbus, providing several control-interface choices.
Read More