

A deeper 70 x 70 x 38 mm frame distinguishes AFB0712VHE for server and power-supply cooling. The 12VDC axial fan lists 7000 rpm operation and 216.7 Pa maximum pressure, with an 8.4 W input rating.
| Rated Voltage(V) | 12 |
|---|---|
| Size(mm) | 70*70*38 |
| Max.Air Flow(m³/h) | 105.74 |
| Max.Pressure(Pa) | 216.7 |
| Input Power(W) | 8.4 |
| Speed(rpm) | 7000 |
| Noise(db) | 51 |
The Delta AFB0712VHE is a brushless DC axial fan for server and storage equipment. It provides a defined airflow path where equipment layout leaves limited room for passive heat removal.
The 12 V DC supply requirement gives electrical designers a clear basis for matching the fan to the equipment power architecture. The axial layout moves air along the fan axis, supporting a direct ventilation route through the equipment opening. Keeping inlet obstructions clear helps preserve useful airflow without spending extra power on avoidable system losses.
This fan is a practical candidate for equipment builders and service teams when its verified duty point and mounting interface match the finished system.
Delta AFB0712VHE serves server and storage equipment, helping remove heat from processors, drives and other heat-producing assemblies. Airflow supports stable equipment temperatures.
In power-supply equipment, Delta AFB0712VHE helps remove heat from power-conversion components. The cooling solution addresses electrical conversion losses to support dependable power delivery.
For telecommunications equipment, Delta AFB0712VHE provides equipment cooling around densely arranged electronic assemblies. Managing continuous communication duty helps maintain service continuity.
In industrial control equipment, air movement helps handle heat accumulated within enclosures. Delta AFB0712VHE supports cooling around controllers and electronic modules, contributing to stable automation operation.
AFB0712VHE is listed for Server and Power Supply cooling. Confirm the installed airflow demand, pressure loss and ambient conditions before approval.
The workbook lists 216.7 Pa maximum pressure. Maximum pressure and maximum airflow occur at different points, so select AFB0712VHE from its curve at the required system resistance.
The filter data does not confirm a control interface. Check the exact-model datasheet and wiring for PWM, analog control, FG/RD feedback or fixed-speed operation before connection.
8.4 W is shown in the filter data. Check whether the corresponding datasheet defines it as rated, free-air or maximum-load input before sizing the power source.
The listed noise value is 51 dB, but compare values only under matching test conditions. Installed noise also depends on speed, restriction, resonance and enclosure geometry.

The 210.2 Pa maximum-pressure entry is a key reason to evaluate AFB1224EHE-C for power-supply ventilation. This 24VDC axial fan occupies a 120 x 120 x 38 mm space; final selection still depends on the duty point.
Read More
A 1.44 W input makes AFB0624MB a lower-input entry among the listed 24VDC axial fan fans. For server and power-supply ventilation, it provides a 60 x 60 x 15 mm format with a specified 4000 rpm rotor.
Read More
AFB0612HH-A combines a 5000 rpm rotor with a 12VDC axial fan motor for server and power-supply cooling. Its listed 2.04 W input and 74 Pa maximum static pressure accompany a 60 x 60 x 25.4 mm frame.
Read More
AFB1224GHE-C is a 24VDC axial fan for server chassis, with 409.7 m3/h listed maximum airflow. Its 27.6 W input differs from the 12VDC GHE entry; retain the -C suffix when checking connector and control configuration.
Read More
AFB0912HH supports storage-enclosure cooling with a 12VDC axial fan design. At 3200 rpm and 3 W listed input, it represents a distinct operating choice among the supplied 92 mm fans, with a specified 25.4 mm depth.
Read More
Server chassis with space for a 38 mm-deep fan can consider AFB0824SHE, an 80 mm axial model powered by 24VDC. Its listed airflow ceiling is 123.6 m3/h, a useful comparison point for enclosure ventilation designs.
Read More