

At 3060 rpm, GTM031PHJ22M provides an EC centrifugal fan format for server and precision cooling. This 400VAC model lists 1035 Pa maximum pressure and 1000 W input, with maximum airflow specified as 3704 m3/h.
| Rated Voltage(V) | 400 |
|---|---|
| Size(mm) | 400 |
| Max.Air Flow(m³/h) | 3704 |
| Max.Pressure(Pa) | 1035 |
| Input Power(W) | 1000 |
| Speed(rpm) | 3060 |
| Noise(db) | 81 |
Equipment manufacturers evaluating precision cooling equipment can consider Delta GTM031PHJ22M, an EC centrifugal fan. The fan supports heat removal by keeping air moving through the selected cooling path.
A listed speed of 3060 rpm helps define the operating profile when reviewing airflow demand, mechanical mounting and the enclosure's acoustic target. The centrifugal format directs air into the equipment flow path, making duct transitions and outlet alignment important to usable cooling performance.
It suits engineering buyers who need a defined cooling component. Verify the exact wiring and environmental limits before approving long-term installation. Accessible air passages also make routine equipment cleaning easier.
In precision cooling equipment, Delta GTM031PHJ22M helps remove heat from heat-exchange sections. The cooling solution addresses continuous temperature-control demand to support stable environmental conditions.
Delta GTM031PHJ22M serves server and storage equipment, helping remove heat from processors, drives and other heat-producing assemblies. Airflow supports stable equipment temperatures.
In telecommunications equipment, air movement helps handle continuous communication duty. Delta GTM031PHJ22M supports cooling around densely arranged electronic assemblies, contributing to service continuity.
GTM031PHJ22M is listed for Server and Precision cooling. Confirm the installed airflow demand, pressure loss and ambient conditions before approval.
The workbook lists a maximum airflow of 3704 m3/h. This is not the airflow at every system resistance; use the applicable pressure-flow curve to identify the installed operating point.
3060 rpm is listed in the workbook. This value alone does not establish adjustable-speed capability; confirm the control input and permitted operating range in the exact datasheet.
Allow for the listed 400 mm size and follow the exact mounting drawing. Keep inlet and outlet clear, use the specified fasteners and verify wiring before energizing the fan.
The provided parameters do not prove a cost saving. Compare purchase price, power at the real operating point, service access, expected life and downtime risk for the complete cooling system.
The listed noise value is 81 dB, but compare values only under matching test conditions. Installed noise also depends on speed, restriction, resonance and enclosure geometry.

GTM031FUC20R is a nominal 230VAC EC centrifugal fan for AHUs and precision air conditioning. Its PDF specifies RS485 communication and an alarm relay, with 734 Pa maximum pressure and a 2500 rpm speed.
Read More
GTM056PUT34R is listed for three-phase 380-480VAC as an EC centrifugal fan for AHU cooling. Its 1550 rpm speed identifies a slower option than several smaller GTM entries; the supplied size is 560 mm.
Read More
GTM045PUV36R is listed as a three-phase 380-480VAC EC centrifugal fan for precision AC and AHUs. A 6000 W input is the key supply-sizing figure; the 450 mm entry must be checked against the final assembly drawing.
Read More
GTM050EUD19E is listed for three-phase 380-480VAC operation as an EC centrifugal fan for AHUs and precision air conditioning. Its 500 mm size is documented; further performance details require the exact datasheet.
Read More
GTM056PBT34R combines a 565 mm EC centrifugal fan format with three-phase 380-480VAC operation for AHUs and precision AC. Its listed 1550 rpm speed is paired with 14068 m3/h maximum airflow and 3100 W input.
Read More
For AHU and precision air-conditioning layouts, GTM045PBV36R offers a listed 460 mm EC centrifugal fan format. The three-phase 380-480VAC model has a 3570 rpm speed specification and 6000 W listed input.
Read More