





GTW017EUB12 is an EC axial fan for server and precision cooling with a specified 200-240VAC input. Its PDF documents 0-10V/PWM speed control and a fan-speed signal, alongside a 5800 rpm rating.
| Rated Voltage(V) | 1~200-240 |
|---|---|
| Size(mm) | 200 x 122 |
| Max.Air Flow(m³/h) | 1177 |
| Max.Pressure(Pa) | 844 |
| Input Power(W) | 240 |
| Speed(rpm) | 5800 |
| Noise(db) | 70.5 |
The GTW017EUB12 addresses ventilation needs in server and storage equipment. Delta's EC axial fan format allows cooling airflow to be integrated alongside the equipment's heat-producing assemblies.
The 1~200-240 V AC supply requirement gives electrical designers a clear basis for matching the fan to the equipment power architecture. Ball-bearing motor support provides a durable rotating assembly for repeated operating duty. Keeping inlet obstructions clear helps preserve useful airflow without spending extra power on avoidable system losses.
For system integrators, a confirmed operating point and exact interface match provide the basis for stable cooling and dependable replacement planning.
In precision cooling equipment, air movement helps handle continuous temperature-control demand. Delta GTW017EUB12 supports cooling around heat-exchange sections, contributing to stable environmental conditions.
Delta GTW017EUB12 serves server and storage equipment, helping remove heat from processors, drives and other heat-producing assemblies. Airflow supports stable equipment temperatures.
In telecommunications equipment, Delta GTW017EUB12 helps remove heat from densely arranged electronic assemblies. The cooling solution addresses continuous communication duty to support service continuity.
GTW017EUB12 is listed for Server and Precision cooling. Confirm the installed airflow demand, pressure loss and ambient conditions before approval.
The workbook lists 200 x 122 mm. Confirm overall depth, hole pattern, connector clearance and guard or inlet-ring dimensions in the exact mechanical drawing.
Isolate power first. Verify the approved supply, connector, polarity or phase, control-enable input and any obstruction; follow the exact specification and do not bypass protection circuits.
5800 rpm is listed in the workbook. This value alone does not establish adjustable-speed capability; confirm the control input and permitted operating range in the exact datasheet.
A matching outline alone does not prove compatibility. Check 1~200-240VAC, mounting dimensions, connector, pinout, airflow direction, control signals and the required pressure-flow point.
The listed noise value is 70.5 dB, but compare values only under matching test conditions. Installed noise also depends on speed, restriction, resonance and enclosure geometry.

GTW091PUR22EA offers EC axial fan ventilation for server cooling on three-phase 380-480VAC. A listed 910 mm size and 950 rpm speed distinguish this entry, with 30984 m3/h maximum airflow in the supplied table.
Read More
GTW080PUU23E is an EC axial fan listed for three-phase 380-480VAC server cooling. Its test table records 19626 m3/h at 265 Pa and 1200 rpm without a guard, providing a loaded operating point for system comparison.
Read More
GTW050EUD19E is listed as an EC axial fan for server and precision cooling on single-phase 200-277VAC. The supplied 497 mm size and 1500 rpm speed accompany a maximum airflow specification of 9046 m3/h.
Read More
The GTW091PUU23E is an EC axial fan for server and precision cooling, listed for three-phase 380-480VAC. Its PDF records 36185.9 m3/h at free air and 1100 rpm without a fan guard, identifying the test condition.
Read More
GTW091PUR22E pairs nominal 400VAC EC axial operation with a 950 rpm speed for server and precision cooling. Its PDF lists 30984 m3/h maximum airflow and 0-10V/PWM control for adjusting the fan speed.
Read More
An 800 mm EC axial fan format identifies GTW080PUR23E for server and precision cooling. Listed for three-phase 380-480VAC, the model has a 2200 W input specification; exact control interfaces need confirmation.
Read More