

GTW091PUR22E pairs nominal 400VAC EC axial operation with a 950 rpm speed for server and precision cooling. Its PDF lists 30984 m3/h maximum airflow and 0-10V/PWM control for adjusting the fan speed.
| Rated Voltage(V) | 3~380-480 |
|---|---|
| Size(mm) | 905 |
| Max.Air Flow(m³/h) | 30984 |
| Input Power(W) | 2200 |
| Speed(rpm) | 950 |
The Delta GTW091PUR22E is an EC axial fan for precision cooling equipment. It provides a defined airflow path where equipment layout leaves limited room for passive heat removal.
The 3~380-480 V AC supply requirement gives electrical designers a clear basis for matching the fan to the equipment power architecture. Ball-bearing motor support provides a durable rotating assembly for repeated operating duty. Good inlet spacing helps reduce turbulence, which matters when balancing usable cooling capacity against installed sound levels.
For system integrators, a confirmed operating point and exact interface match provide the basis for stable cooling and dependable replacement planning. Accessible air passages also make routine equipment cleaning easier.
Delta GTW091PUR22E supports cooling in precision cooling equipment. Air circulation around heat-exchange sections helps manage continuous temperature-control demand, supporting stable environmental conditions.
Delta GTW091PUR22E serves server and storage equipment, helping remove heat from processors, drives and other heat-producing assemblies. Airflow supports stable equipment temperatures.
For telecommunications equipment, Delta GTW091PUR22E provides equipment cooling around densely arranged electronic assemblies. Managing continuous communication duty helps maintain service continuity.
GTW091PUR22E is listed for Server and Precision cooling. Confirm the installed airflow demand, pressure loss and ambient conditions before approval.
The filter data does not confirm a control interface. Check the exact-model datasheet and wiring for PWM, analog control, FG/RD feedback or fixed-speed operation before connection.
2200 W is shown in the filter data. Check whether the corresponding datasheet defines it as rated, free-air or maximum-load input before sizing the power source.
Allow for the listed 905 mm size and follow the exact mounting drawing. Keep inlet and outlet clear, use the specified fasteners and verify wiring before energizing the fan.
RoHS Compliant is listed in the workbook. Obtain the current exact-model declaration and datasheet before claiming safety approvals, ingress protection or international compliance.
In Stock is shown in the workbook, but this is not a delivery guarantee. Confirm the complete part number, quantity, current inventory and committed lead time when ordering.

GTW080PUU23E is an EC axial fan listed for three-phase 380-480VAC server cooling. Its test table records 19626 m3/h at 265 Pa and 1200 rpm without a guard, providing a loaded operating point for system comparison.
Read More
The GTW091PUU23E is an EC axial fan for server and precision cooling, listed for three-phase 380-480VAC. Its PDF records 36185.9 m3/h at free air and 1100 rpm without a fan guard, identifying the test condition.
Read More
An 800 mm EC axial fan format identifies GTW080PUR23E for server and precision cooling. Listed for three-phase 380-480VAC, the model has a 2200 W input specification; exact control interfaces need confirmation.
Read More
GTW071PUT23E is a nominal 400VAC EC axial fan for server and precision cooling. Its PDF specifies an IP54 rating and RS485 Modbus control, with 23134 m3/h maximum airflow at the documented 1250 rpm setup.
Read More
GTW080PUR22E offers EC axial fan airflow for server and precision cooling at nominal 400VAC. The PDF specifies 0-10V/PWM and RS485 control, with 25077 m3/h maximum airflow and a rated 1020 rpm speed.
Read More
GTW050EUD19E is listed as an EC axial fan for server and precision cooling on single-phase 200-277VAC. The supplied 497 mm size and 1500 rpm speed accompany a maximum airflow specification of 9046 m3/h.
Read More