

GTW080PUU23E is an EC axial fan listed for three-phase 380-480VAC server cooling. Its test table records 19626 m3/h at 265 Pa and 1200 rpm without a guard, providing a loaded operating point for system comparison.
| Rated Voltage(V) | 3~ 380-480 |
|---|---|
| Size(mm) | 800 |
| Max.Air Flow(m³/h) | 30326 |
| Max.Pressure(Pa) | 265 |
| Input Power(W) | 3100 |
| Speed(rpm) | 1200 |
| Noise(db) | 78 |
GTW080PUU23E is a Delta cooling solution for precision cooling equipment. This EC axial fan gives designers a practical means of circulating air through a thermally loaded equipment section.
The listed 3100 W power rating is relevant to supply sizing and the system energy budget; actual consumption depends on the operating duty. Ball-bearing motor support provides a durable rotating assembly for repeated operating duty. Selecting the operating point against real pressure loss helps avoid oversizing and keeps thermal design focused on useful air delivery.
For OEM design-in and replacement sourcing, confirm the full suffix, connector and mounting pattern to support dependable service in the intended assembly.
In precision cooling equipment, air movement helps handle continuous temperature-control demand. Delta GTW080PUU23E supports cooling around heat-exchange sections, contributing to stable environmental conditions.
Delta GTW080PUU23E serves server and storage equipment, helping remove heat from processors, drives and other heat-producing assemblies. Airflow supports stable equipment temperatures.
In telecommunications equipment, Delta GTW080PUU23E helps remove heat from densely arranged electronic assemblies. The cooling solution addresses continuous communication duty to support service continuity.
A matching outline alone does not prove compatibility. Check 3~ 380-480VAC, mounting dimensions, connector, pinout, airflow direction, control signals and the required pressure-flow point.
The workbook lists 800 mm. Confirm overall depth, hole pattern, connector clearance and guard or inlet-ring dimensions in the exact mechanical drawing.
Isolate power first. Verify the approved supply, connector, polarity or phase, control-enable input and any obstruction; follow the exact specification and do not bypass protection circuits.
The workbook lists a maximum airflow of 30326 m3/h. This is not the airflow at every system resistance; use the applicable pressure-flow curve to identify the installed operating point.
GTW080PUU23E is listed for Server and Precision cooling. Confirm the installed airflow demand, pressure loss and ambient conditions before approval.
The filter data does not confirm a control interface. Check the exact-model datasheet and wiring for PWM, analog control, FG/RD feedback or fixed-speed operation before connection.

The GTW091PUU23E is an EC axial fan for server and precision cooling, listed for three-phase 380-480VAC. Its PDF records 36185.9 m3/h at free air and 1100 rpm without a fan guard, identifying the test condition.
Read More
GTW091PUR22E pairs nominal 400VAC EC axial operation with a 950 rpm speed for server and precision cooling. Its PDF lists 30984 m3/h maximum airflow and 0-10V/PWM control for adjusting the fan speed.
Read More
An 800 mm EC axial fan format identifies GTW080PUR23E for server and precision cooling. Listed for three-phase 380-480VAC, the model has a 2200 W input specification; exact control interfaces need confirmation.
Read More
GTW071PUT23E is a nominal 400VAC EC axial fan for server and precision cooling. Its PDF specifies an IP54 rating and RS485 Modbus control, with 23134 m3/h maximum airflow at the documented 1250 rpm setup.
Read More
GTW080PUR22E offers EC axial fan airflow for server and precision cooling at nominal 400VAC. The PDF specifies 0-10V/PWM and RS485 control, with 25077 m3/h maximum airflow and a rated 1020 rpm speed.
Read More
GTW050EUD19E is listed as an EC axial fan for server and precision cooling on single-phase 200-277VAC. The supplied 497 mm size and 1500 rpm speed accompany a maximum airflow specification of 9046 m3/h.
Read More