

The GTW091PUU23E is an EC axial fan for server and precision cooling, listed for three-phase 380-480VAC. Its PDF records 36185.9 m3/h at free air and 1100 rpm without a fan guard, identifying the test condition.
| Rated Voltage(V) | 3~380-480 |
|---|---|
| Size(mm) | 910 |
| Max.Air Flow(m³/h) | 36186 |
| Max.Pressure(Pa) | 219 |
| Input Power(W) | 3100 |
| Speed(rpm) | 1100 |
| Noise(db) | 86 |
Delta GTW091PUU23E serves server and storage equipment as an EC axial fan. Equipment builders can use its mechanical format to establish forced ventilation near heat-producing parts.
The listed 3100 W power rating is relevant to supply sizing and the system energy budget; actual consumption depends on the operating duty. Ball-bearing motor support provides a durable rotating assembly for repeated operating duty. Good inlet spacing helps reduce turbulence, which matters when balancing usable cooling capacity against installed sound levels.
Equipment manufacturers and maintenance teams should match the complete part number and installation limits for reliable operation across the service cycle.
In precision cooling equipment, Delta GTW091PUU23E helps remove heat from heat-exchange sections. The cooling solution addresses continuous temperature-control demand to support stable environmental conditions.
Delta GTW091PUU23E serves server and storage equipment, helping remove heat from processors, drives and other heat-producing assemblies. Airflow supports stable equipment temperatures.
In telecommunications equipment, air movement helps handle continuous communication duty. Delta GTW091PUU23E supports cooling around densely arranged electronic assemblies, contributing to service continuity.
The listed input-power figure is 3100 W, but efficiency must be evaluated at the required airflow and pressure. Check the applicable fan curve and test conditions before comparison.
The supplied filter data does not establish an unconditional 24/7 rating. Confirm bearing life, temperature range, duty cycle and derating in the exact datasheet, then validate system-level redundancy.
The listed noise value is 86 dB, but compare values only under matching test conditions. Installed noise also depends on speed, restriction, resonance and enclosure geometry.
The filter data does not confirm a control interface. Check the exact-model datasheet and wiring for PWM, analog control, FG/RD feedback or fixed-speed operation before connection.
The workbook lists 910 mm. Confirm overall depth, hole pattern, connector clearance and guard or inlet-ring dimensions in the exact mechanical drawing.
GTW091PUU23E is listed for Server and Precision cooling. Confirm the installed airflow demand, pressure loss and ambient conditions before approval.

GTW080PUU23E is an EC axial fan listed for three-phase 380-480VAC server cooling. Its test table records 19626 m3/h at 265 Pa and 1200 rpm without a guard, providing a loaded operating point for system comparison.
Read More
GTW091PUR22E pairs nominal 400VAC EC axial operation with a 950 rpm speed for server and precision cooling. Its PDF lists 30984 m3/h maximum airflow and 0-10V/PWM control for adjusting the fan speed.
Read More
An 800 mm EC axial fan format identifies GTW080PUR23E for server and precision cooling. Listed for three-phase 380-480VAC, the model has a 2200 W input specification; exact control interfaces need confirmation.
Read More
GTW071PUT23E is a nominal 400VAC EC axial fan for server and precision cooling. Its PDF specifies an IP54 rating and RS485 Modbus control, with 23134 m3/h maximum airflow at the documented 1250 rpm setup.
Read More
GTW080PUR22E offers EC axial fan airflow for server and precision cooling at nominal 400VAC. The PDF specifies 0-10V/PWM and RS485 control, with 25077 m3/h maximum airflow and a rated 1020 rpm speed.
Read More
GTW050EUD19E is listed as an EC axial fan for server and precision cooling on single-phase 200-277VAC. The supplied 497 mm size and 1500 rpm speed accompany a maximum airflow specification of 9046 m3/h.
Read More