



GTW080PUR22E offers EC axial fan airflow for server and precision cooling at nominal 400VAC. The PDF specifies 0-10V/PWM and RS485 control, with 25077 m3/h maximum airflow and a rated 1020 rpm speed.
| Rated Voltage(V) | 3~380-480 |
|---|---|
| Size(mm) | 788 |
| Max.Air Flow(m³/h) | 25077 |
| Input Power(W) | 2200 |
| Speed(rpm) | 1020 |
The GTW080PUR22E addresses ventilation needs in server and storage equipment. Delta's EC axial fan format allows cooling airflow to be integrated alongside the equipment's heat-producing assemblies.
The listed 2200 W power rating is relevant to supply sizing and the system energy budget; actual consumption depends on the operating duty. Electronic commutation is part of the EC motor architecture; speed-control inputs must be checked against the complete electrical specification. Acoustic results depend on the enclosure and duty point; smooth inlet geometry helps control avoidable airflow noise.
Choose it for a model-specific cooling requirement, with connector, operating conditions and airflow direction checked before release to production.
For precision cooling equipment, Delta GTW080PUR22E provides equipment cooling around heat-exchange sections. Managing continuous temperature-control demand helps maintain stable environmental conditions.
Delta GTW080PUR22E serves server and storage equipment, helping remove heat from processors, drives and other heat-producing assemblies. Airflow supports stable equipment temperatures.
Delta GTW080PUR22E supports cooling in telecommunications equipment. Air circulation around densely arranged electronic assemblies helps manage continuous communication duty, supporting service continuity.
GTW080PUR22E provides a defined axial fan format with a listed 1020 rpm speed in a 788 mm size. Compare its fan curve with the actual duty point rather than assuming a universal advantage.
The supplied filter data does not establish an unconditional 24/7 rating. Confirm bearing life, temperature range, duty cycle and derating in the exact datasheet, then validate system-level redundancy.
2200 W is shown in the filter data. Check whether the corresponding datasheet defines it as rated, free-air or maximum-load input before sizing the power source.
GTW080PUR22E is listed for Server and Precision cooling. Confirm the installed airflow demand, pressure loss and ambient conditions before approval.
1020 rpm is listed in the workbook. This value alone does not establish adjustable-speed capability; confirm the control input and permitted operating range in the exact datasheet.

GTW080PUU23E is an EC axial fan listed for three-phase 380-480VAC server cooling. Its test table records 19626 m3/h at 265 Pa and 1200 rpm without a guard, providing a loaded operating point for system comparison.
Read More
The GTW091PUU23E is an EC axial fan for server and precision cooling, listed for three-phase 380-480VAC. Its PDF records 36185.9 m3/h at free air and 1100 rpm without a fan guard, identifying the test condition.
Read More
GTW091PUR22E pairs nominal 400VAC EC axial operation with a 950 rpm speed for server and precision cooling. Its PDF lists 30984 m3/h maximum airflow and 0-10V/PWM control for adjusting the fan speed.
Read More
An 800 mm EC axial fan format identifies GTW080PUR23E for server and precision cooling. Listed for three-phase 380-480VAC, the model has a 2200 W input specification; exact control interfaces need confirmation.
Read More
GTW071PUT23E is a nominal 400VAC EC axial fan for server and precision cooling. Its PDF specifies an IP54 rating and RS485 Modbus control, with 23134 m3/h maximum airflow at the documented 1250 rpm setup.
Read More
GTW050EUD19E is listed as an EC axial fan for server and precision cooling on single-phase 200-277VAC. The supplied 497 mm size and 1500 rpm speed accompany a maximum airflow specification of 9046 m3/h.
Read More