

GTW091PUU29E-V001 uses nominal 400VAC EC axial fan drive for server and precision cooling. The supplied PDF documents IP55 protection, 0-10V/PWM control and a maximum airflow of 34410 m3/h at the rated setup.
| Rated Voltage(V) | 400 |
|---|---|
| Size(mm) | 910 |
| Max.Air Flow(m³/h) | 11906 |
| Max.Pressure(Pa) | 364 |
| Input Power(W) | 4000 |
| Speed(rpm) | 1260 |
| Noise(db) | 86.3 |
Designed for server and storage equipment, Delta GTW091PUU29E-V001 brings EC axial fan integration to thermally loaded assemblies. Its role is to move cooling air across components during equipment operation.
A specified maximum airflow of 34410 m3/h provides air-delivery capacity for thermal design; the installed duty must also account for system resistance. The 0-10 V and PWM control inputs allow airflow demand to guide motor speed, supporting part-load energy and acoustic management. A controlled exhaust route limits recirculation, allowing the delivered air to carry heat away rather than return to the inlet.
It suits engineering buyers who need a defined cooling component. Verify the exact wiring and environmental limits before approving long-term installation.
In precision cooling equipment, Delta GTW091PUU29E-V001 helps remove heat from heat-exchange sections. The cooling solution addresses continuous temperature-control demand to support stable environmental conditions.
Delta GTW091PUU29E-V001 serves server and storage equipment, helping remove heat from processors, drives and other heat-producing assemblies. Airflow supports stable equipment temperatures.
In telecommunications equipment, air movement helps handle continuous communication duty. Delta GTW091PUU29E-V001 supports cooling around densely arranged electronic assemblies, contributing to service continuity.
400VAC is listed for GTW091PUU29E-V001. Verify the allowable input range, phase, frequency where applicable, polarity and wiring diagram in the exact specification.
4000 W is shown in the filter data. Check whether the corresponding datasheet defines it as rated, free-air or maximum-load input before sizing the power source.
The provided parameters do not prove a cost saving. Compare purchase price, power at the real operating point, service access, expected life and downtime risk for the complete cooling system.
The workbook lists 910 mm. Confirm overall depth, hole pattern, connector clearance and guard or inlet-ring dimensions in the exact mechanical drawing.
GTW091PUU29E-V001 is listed for Server and Precision cooling. Confirm the installed airflow demand, pressure loss and ambient conditions before approval.

GTW080PUU23E is an EC axial fan listed for three-phase 380-480VAC server cooling. Its test table records 19626 m3/h at 265 Pa and 1200 rpm without a guard, providing a loaded operating point for system comparison.
Read More
The GTW091PUU23E is an EC axial fan for server and precision cooling, listed for three-phase 380-480VAC. Its PDF records 36185.9 m3/h at free air and 1100 rpm without a fan guard, identifying the test condition.
Read More
GTW091PUR22EA offers EC axial fan ventilation for server cooling on three-phase 380-480VAC. A listed 910 mm size and 950 rpm speed distinguish this entry, with 30984 m3/h maximum airflow in the supplied table.
Read More
GTW050EUD19E is listed as an EC axial fan for server and precision cooling on single-phase 200-277VAC. The supplied 497 mm size and 1500 rpm speed accompany a maximum airflow specification of 9046 m3/h.
Read More
GTW091PUR22E pairs nominal 400VAC EC axial operation with a 950 rpm speed for server and precision cooling. Its PDF lists 30984 m3/h maximum airflow and 0-10V/PWM control for adjusting the fan speed.
Read More
An 800 mm EC axial fan format identifies GTW080PUR23E for server and precision cooling. Listed for three-phase 380-480VAC, the model has a 2200 W input specification; exact control interfaces need confirmation.
Read More