

Applied in servers and data-center electronics, SUNON PF97331BX-B00U-S99 is a 12 VDC DC blower in a 97 × 95 × 33 mm frame. 1300.2 Pa maximum pressure is the standout documented duty-point value. During mounting verification, compare the model's model record. Validate mounting and wiring from the model drawing.
| Rated Voltage(V) | 12 |
|---|---|
| Size(mm) | 97x95x33mm |
| Max.Pressure(Pa) | 1300.2 |
| Input Power(W) | 4.2 |
| Speed(rpm) | 6800 |
SUNON PF97331BX-B00U-S99 brings active air movement to industrial equipment. This DC brushless blower helps equipment designers control thermal conditions around densely arranged parts.
The SUNON product series carries RoHS compliance and recognized safety approvals; buyers should confirm the approval marks for this exact suffix and target market. The enclosure should direct air across the heat source because bypass flow can reduce cooling even when the fan runs normally.
The final PF97331BX-B00U-S99 selection should consider connector reach as part of the installation layout. Finishing system-resistance review during prototype approval helps reduce integration uncertainty and supports reliable equipment cooling. Confirm that the mating lead reaches without tension or sharp bending.
Compare its listed 4.2 W input with the required airflow and run time. Total savings depend on the complete system duty point.
The listed rating is 12 VDC. Verify polarity or mains frequency, wiring, and protection before commissioning.
Verify supply, wiring, obstructions, impeller movement, and protection status. Use the model datasheet before replacement or repair.
Yes. The worksheet lists up to 1300.2 Pa; compare it with the system curve.
Use the listed voltage, size, 6800 rpm, and 4.2 W input for preliminary comparison.

The PF70201V1-1Q01U-S99 is SUNON's 12 VDC, 70 × 70 × 20 mm DC blower option for servers and data-center electronics. Up to 73.1 m³/h is its most prominent listed performance figure. During design qualification, compare the model's power demand. Match the exact part number before approving a substitute.
Read More
Built around servers and data-center electronics, SUNON PF80251B3-1000U-S99 is a 12 VDC DC axial fan in a 80 × 80 × 25 mm frame. Up to 90.1 m³/h is its most prominent listed performance figure. Review its acoustic value during airflow-path design. Obtain the applicable curve before final duty-point approval.
Read More
A 80 × 80 × 25 mm frame and 24 VDC rating define PF80252B1-1000U-S99, a DC axial fan for servers and data-center electronics. Up to 102 m³/h is its most prominent listed performance figure. Treat the system interface as a primary input to acoustic assessment. Match the exact part number before approving a substitute.
Read More
For servers and data-center electronics, PF60252B2-10000-A99 combines 24 VDC operation with a 60 × 60 × 25 mm DC axial fan design. 124.5 Pa maximum pressure is the standout documented duty-point value. Use the documented speed benchmark when planning installation review. Obtain the applicable curve before final duty-point approval.
Read More
The PF60252B1-10000-A99 is SUNON's 24 VDC, 60 × 60 × 25 mm DC axial fan option for servers and data-center electronics. 139.5 Pa maximum pressure is the standout documented duty-point value. Review its airflow profile during installation review. Obtain the applicable curve before final duty-point approval.
Read More
For ventilation needs in servers and data-center electronics, the PF60251VX-10000-A99 provides a 12 VDC DC axial fan configuration measuring 60 × 60 × 25 mm. 8300 rpm is the model's most distinctive operating parameter. Treat the application data as a primary input to design qualification. Match the exact part number before approving a substitute.
Read More