

FFB0612EHE is the 12VDC axial fan configuration with 14.4 W listed input in this 60 mm telecom-cooling group. The 38 mm-deep housing permits a specific mechanical fit; its nominal speed is recorded as 8000 rpm.
| Rated Voltage(V) | 12 |
|---|---|
| Size(mm) | 60×60×38 |
| Max.Air Flow(m³/h) | 85.3 |
| Max.Pressure(Pa) | 242.1 |
| Input Power(W) | 14.4 |
| Speed(rpm) | 8000 |
| Noise(db) | 54.5 |
Designed for uninterruptible power systems, Delta FFB0612EHE brings brushless DC axial fan integration to thermally loaded assemblies. Its role is to move cooling air across components during equipment operation.
The 12 V DC supply requirement gives electrical designers a clear basis for matching the fan to the equipment power architecture. Its high-performance fan family emphasizes air delivery and pressure capability, helping address the resistance of densely populated equipment. The mounting arrangement and duct transitions should preserve the intended air path so cooling is not lost to leakage or recirculation.
For procurement, retain the complete model code and check the interface against the drawing; this supports repeatable assembly and accurate replacement ordering.
Delta FFB0612EHE serves server and storage equipment, helping remove heat from processors, drives and other heat-producing assemblies. Airflow supports stable equipment temperatures.
In uninterruptible power systems, air movement helps handle heat produced during power conversion. Delta FFB0612EHE supports cooling around power electronics, contributing to stable backup-power operation.
Delta FFB0612EHE supports cooling in power-supply equipment. Air circulation around power-conversion components helps manage electrical conversion losses, supporting dependable power delivery.
In telecommunications equipment, Delta FFB0612EHE helps remove heat from densely arranged electronic assemblies. The cooling solution addresses continuous communication duty to support service continuity.
The workbook lists 242.1 Pa maximum pressure. Maximum pressure and maximum airflow occur at different points, so select FFB0612EHE from its curve at the required system resistance.
12VDC is listed for FFB0612EHE. Verify the allowable input range, phase, frequency where applicable, polarity and wiring diagram in the exact specification.
The supplied filter data does not establish an unconditional 24/7 rating. Confirm bearing life, temperature range, duty cycle and derating in the exact datasheet, then validate system-level redundancy.
Serviceability depends on access, connector choice and mounting. Plan isolation and cleaning access, inspect the airflow path, and use the manufacturer's replacement guidance rather than attempting an unsupported repair.
FFB0612EHE is listed for Server and Telecommunications cooling. Confirm the installed airflow demand, pressure loss and ambient conditions before approval.

The FFB0824EHE is an 80 mm axial fan for telecom cooling on 24VDC. With 5700 rpm listed for its 38 mm-deep assembly, rotor speed and housing depth are central checks when choosing this model for an equipment rack.
Read More
For server airflow in an 80 mm frame, FFB0812EHE uses a 38 mm-deep axial design. The 12VDC fan has a 5700 rpm rating and a listed maximum airflow of 136 m3/h, with 10.8 W input power specified.
Read More
FFB0624EHE brings a 38 mm-deep, 60 mm axial format to server and telecom cooling. The 24VDC model runs at 8000 rpm, with 85.34 m3/h maximum airflow specified for this higher-speed enclosure fan.
Read More
For server and telecom ventilation, FFB1224EHE is a 24VDC axial fan with a 24 W input rating. Its 120 x 120 x 38 mm dimensions and 4000 rpm speed offer a defined mechanical and electrical selection profile.
Read More
FFB1212EHE supports server and telecom ventilation with 322.8 m3/h listed maximum airflow. The 12VDC axial fan combines a 120 x 120 x 38 mm frame with a 4000 rpm speed and 24 W electrical input.
Read More
FFB0924EHE combines a 92 x 92 x 38 mm axial fan assembly with 24VDC operation for telecom and server cooling. Its listed 187 m3/h maximum airflow is paired with a 4800 rpm speed and 12 W input.
Read More