



The FFB0824EHE is an 80 mm axial fan for telecom cooling on 24VDC. With 5700 rpm listed for its 38 mm-deep assembly, rotor speed and housing depth are central checks when choosing this model for an equipment rack.
| Rated Voltage(V) | 24 |
|---|---|
| Size(mm) | 80*80*38 |
| Max.Air Flow(m³/h) | 136 |
| Input Power(W) | 12 |
| Speed(rpm) | 5700 |
| Noise(db) | 52.5 |
For telecommunications equipment, the FFB0824EHE from Delta is a brushless DC axial fan that supports active thermal management. A planned inlet-to-outlet route helps the installation carry component heat away.
A listed speed of 5700 rpm helps define the operating profile when reviewing airflow demand, mechanical mounting and the enclosure's acoustic target. Its high-performance fan family emphasizes air delivery and pressure capability, helping address the resistance of densely populated equipment. A controlled exhaust route limits recirculation, allowing the delivered air to carry heat away rather than return to the inlet.
For OEM design-in and replacement sourcing, confirm the full suffix, connector and mounting pattern to support dependable service in the intended assembly.
Delta FFB0824EHE serves server and storage equipment, helping remove heat from processors, drives and other heat-producing assemblies. Airflow supports stable equipment temperatures.
In uninterruptible power systems, Delta FFB0824EHE helps remove heat from power electronics. The cooling solution addresses heat produced during power conversion to support stable backup-power operation.
For power-supply equipment, Delta FFB0824EHE provides equipment cooling around power-conversion components. Managing electrical conversion losses helps maintain dependable power delivery.
In telecommunications equipment, air movement helps handle continuous communication duty. Delta FFB0824EHE supports cooling around densely arranged electronic assemblies, contributing to service continuity.
FFB0824EHE is listed for Server and Telecommunications cooling. Confirm the installed airflow demand, pressure loss and ambient conditions before approval.
12 W is shown in the filter data. Check whether the corresponding datasheet defines it as rated, free-air or maximum-load input before sizing the power source.
The workbook lists 80 x 80 x 38 mm. Confirm overall depth, hole pattern, connector clearance and guard or inlet-ring dimensions in the exact mechanical drawing.
Allow for the listed 80 x 80 x 38 mm size and follow the exact mounting drawing. Keep inlet and outlet clear, use the specified fasteners and verify wiring before energizing the fan.
Isolate power first. Verify the approved supply, connector, polarity or phase, control-enable input and any obstruction; follow the exact specification and do not bypass protection circuits.

FFB0612EHE is the 12VDC axial fan configuration with 14.4 W listed input in this 60 mm telecom-cooling group. The 38 mm-deep housing permits a specific mechanical fit; its nominal speed is recorded as 8000 rpm.
Read More
For server airflow in an 80 mm frame, FFB0812EHE uses a 38 mm-deep axial design. The 12VDC fan has a 5700 rpm rating and a listed maximum airflow of 136 m3/h, with 10.8 W input power specified.
Read More
FFB0924EHE combines a 92 x 92 x 38 mm axial fan assembly with 24VDC operation for telecom and server cooling. Its listed 187 m3/h maximum airflow is paired with a 4800 rpm speed and 12 W input.
Read More
FFB0624EHE brings a 38 mm-deep, 60 mm axial format to server and telecom cooling. The 24VDC model runs at 8000 rpm, with 85.34 m3/h maximum airflow specified for this higher-speed enclosure fan.
Read More
For server and telecom ventilation, FFB1224EHE is a 24VDC axial fan with a 24 W input rating. Its 120 x 120 x 38 mm dimensions and 4000 rpm speed offer a defined mechanical and electrical selection profile.
Read More
FFB1212EHE supports server and telecom ventilation with 322.8 m3/h listed maximum airflow. The 12VDC axial fan combines a 120 x 120 x 38 mm frame with a 4000 rpm speed and 24 W electrical input.
Read More